Download INSTALLATION AND OPERATING INSTRUCTIONS

Spider
6
ELECTRICAL CONNECTION
The Spider Kit is designed for a 230 V~, 50 Hz electrical connection. For it to function correctly, the
cable supplied with the kit must be connected as shown in the connection diagram below.
Remember to earth the appliance.
If the Spider Kit is installed in combination with a Kit Aspiration supplied by DOMUSA, the indications
given in the diagram below must be followed for correct electrical connection to the terminal strip of
the Kit Aspiration’s electronic control:
NOTE: The power supply must be connected so that the kit can be totally isolated and disconnected
in order to safely carry out any maintenance operations.
12