Download Installation and operating instructions

TaskManager application
Basics
8
TaskManager application
8.1
Basics
8.1.1
About TaskManager
8
„TaskManager“ is an application from Müller-Elektronik working as the interface between an
agricultural device and Farm Management Information System on the terminals.
With TaskManager you can open all orders, previously planned in the Farm Management Information
System, on the terminal.
All information contained in the order will be transferred by TaskManager to specialized applications
of the terminal. This means that each application is doing exactly what it can do best:
▪ The position of the field is transferred to FIELD-Nav. It can therefore navigate the terminal
directly to the field.
▪ The prescription map, field border and other information about any work important for sub-areas
stored in the order are transferred to TRACK-Leader. The field can be therefore processed.
▪ TaskManager documents work duration, attending persons, machines and operating means.
▪ After work completion TaskManager saves all work results on the USB flash drive, so that you
can open them again in your Farm Management Information System.
The version described here supports the following functions:
▪ Creating tasks on the terminal.
▪ Viewing and processing tasks that have been planned using the Farm Management Information
System.
▪ Transferring prescription maps from an order to TRACK-Leader.
▪ Delivering required values to ISOBUS job computers.
▪ Documenting how the work has been done. The type of documented data depends on the type
of the ISOBUS job computer.
▪ Saving work results for further evaluation in PC software.
▪ Recording complete task data.
▪ Exchanging task data between the FarmPilot portal and the TaskManager.
8.1.2
USB flash drive
The USB flash drive has two jobs:
▪ It is used to move data between the Farm Management Information System and the terminal.
▪ It is the external storage during work.
The USB flash drive must always be connected during work.
See also:
▪ Step 1: Transferring data from the Farm Management Information System to the terminal [➙
61]
▪ Step 7: Transferring completed tasks to the Farm Management Information System [➙ 87]
8.1.3
Procedure
Starting the TaskManager application
1. Insert an empty USB flash drive into the terminal.
Copyright © Müller-Elektronik GmbH & Co.KG
51