Download Operating Instructions Type S020

Type S020
Table of Contents
1. About these operating instructions..................................5
6.3.6. Dimensions of the measurement chamber.....................19
1.1. Symbols used........................................................................................5
6.4. K factors................................................................................................. 20
2. Intended use.................................................................................................6
6.4.1. Terms of reference...............................................................20
3. Basic safety information................................................................6
6.4.2. Calculation of K factors (in pulse/litre) for
saddles, fusion spigots, welding sockets with
radius or screw-ons.............................................................20
4. General information............................................................................7
4.1. Manufacturer's address and international contacts..........7
4.2. Warranty conditions............................................................................7
4.3. Information on the Internet.............................................................7
5. Description....................................................................................................8
5.1. Area of application..............................................................................8
6. Technical data............................................................................................8
6.4.3. K factors (in pulse/litre) for T fittings used with
a 8041 or 8045 with a G2'' nut........................................21
6.4.4. K factors (in pulse/litre) for T fittings and welding sockets used with a 8041 or a 8045 with
clamp connection.................................................................23
6.4.5. K factors (in pulse/litre) for T fittings used with
a 8020, 8024, 8025 or 8026...........................................23
6.4.6. K factors (in pulse/litre) for saddles.................................25
6.2. Available certificates..........................................................................8
6.4.7. K factors (in pulse/l) of the fusion spigots and
welding sockets with radius for measuring
devices with a G2'' nut........................................................26
6.3. General technical data......................................................................9
6.4.8. K factors (in pulse/litre) for screw-ons............................28
6.3.1. Diameters available................................................................ 9
7. Installation and commissioning............................................ 29
6.3.2. Materials................................................................................... 9
7.1. Safety instructions........................................................................... 29
6.3.3. Dimensions of T fittings......................................................10
7.2. Installation onto the pipe.............................................................. 30
6.3.4. Dimensions of spigots.........................................................17
7.2.1. Recommandations for installing the S020 fitting
on the pipe.............................................................................30
6.1. Conditions of use.................................................................................8
6.3.5. Dimensions of the saddles.................................................19
7.2.2. Installing a T fitting...............................................................32
English
3