Download SU-I User Manual

SU-I
User Manual
5.3.17 snmpAccCtrl
Use the snmpAccCtrl command to enable access for SNMP managers. All SNMP
managers are identified by IP address, port, and community read and write names
(strings) and can be individually added and removed from the list.
Table 27: CLI - snmpAccCtrl
snmpAccCtrl <add> <alias> <delete> <edit> <show>
Configure SNMP account access settings.
add <Entryindex> <ReadCommunity> <WriteCommunity> <ManagerIpAddress>
Create a new SNMP trap. The index value is assigned automatically. Up to eight settings
may be entered.
EntryIndex: Unique index number to identify this table entry.
Read Community Name: The SNMP community name with read access.
Write Community Name: The SNMP community name with write access.
Manager Address: The IP address of the SNMP manager.
alias <alias name> <replacement text>
alias name: Text to be replaced
replacement text: Text to substitute for alias
delete <EntryIndex> [All | YesToAll]
<EntryIndex>
- Entry index number.
All: Remove all the entries except the first one.
YesToAll: Confirmation to remove all entries.
edit <index> <ReadCommunity> <WriteCommunity> <ManagerIpAddress>
EntryIndex: Unique index number to identify this table entry.
Read Community Name: The SNMP community name with read access.
Write Community Name: The SNMP community name with write access.
Manager Address: The IP address of the SNMP manager.
show
<< SNMP Access Control Table >>
Index: Read Access string:
1
70-00078-01-03
public
Write Access string:
IP Address:
private
0.0.0.0
Proprietary Redline Communications © 2010
Page 53 of 66
July 23, 2010
4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299