Download User Manual - INDUSTRIAL COMMS

„ National and international safety regulations
… Make sure that the electrical installation meets local or nationally
applicable safety regulations.
„ ESD Guidelines
The media modules are equipped with electrostatically sensitive components. These can be destroyed, or their life cycles reduced, by the effects
of an electrical field or by a charge equalization if the card is touched.
For this reason, the cards are packaged in a conductive ESD protective
bag on delivery. The packaging can be reused.
Make sure you adhere to the following protection measures for electrostatically endangered assemblies:
… Create electrical equipotential bonding between yourself and your environment, e.g. using a wristband, which you clamp to the basic device
(knurled screw of an interface card). When the power supply cable is
connected, the basic device is grounded via the power supply connection.
… Only now do you take the card out of the conductive bag.
… Outside the basic device, only store the cards in a conductive ESD
protective bag.
ESD protective field equipment is available for the safe handling of electrostatically endangered assemblies.
You can find more information about electrostaticically endangered assemblies in DIN/IEC 47 (Sec) 1330; February 1994 Edition and DIN EN
100 015.
„ Note on the CE marking
The devices comply with the regulations contained in the following European directives:
2006/95/EG, 2004/108/EG
Directive of the European Parliament and the council for standardizing the
regulations of member states with regard to electromagnetic compatibility.
In accordance with the above-named EU directives, the EU conformity
declaration will be at the disposal of the relevant authorities at the following address:
Hirschmann Automation and Control GmbH
Stuttgarter Strasse 45-51
72654 Neckartenzlingen
Tel.: +49 1805 141538
The product can be used in living areas (living area, place of business,
small business) and in industrial areas.
8
MACH 100
Release
07/09