Download Operating instructions Explosion-proof gear units R..7, F..7, K..7, S..7

Inspection and Maintenance
Inspection/maintenance work on adapter AR
Inspecting /
changing the friction ring pads,
adjusting the slip
torque
6
It is only possible to check and adjust the slip torque accurately by using a torque wrench
with an appropriate connection piece. For the setting of values, see the table on page
71.
[1] [2]
[3] [4] [5]
[6]
[7] [8]
52871AXX
Figure 20: Inspecting / changing the friction
ring pads
[1]
Locking screw
[5]
Friction ring pad
[2]
Cylinder head screw
[6]
Cup spring
[3]
Proximity switch
[7]
Slotted round nut
[4]
Friction disk
[8]
Friction hub
AR71-115
[1]
Z
AR132-195
[2]
[4]
Z
[5]
[3]
52872AXX
Figure 21: Rough torque setting
[1]
Marking
[4]
Markings (carrier disk)
[2]
Multi-tang washer (tangs)
[5]
Slotted round nut
[3]
Slotted round nut
Operating Instructions – Explosion-Proof Gear Units R..7, F..7, K..7, S..7, Spiroplan® W Series
69