Download EasyDive Jaeger 400 USER GUIDE

EZDIVE OSTRICH SMB USER GUIDE
as an octopus, to inflate the buoy (be
the primary
careful of entanglement with
demand valve and direct several
equipment)
exhalations up into the open end of the
2. using a close-circuit buoy with an
buoy. This technique is also useful in cold
inflation valve, which is filled by blowing
conditions to prevent a freeflow caused
directly into the valve inlet or by
by pressing the purge button.
attaching a medium-pressure inflation
Deployment problems
hose from the buoyancy compensator
Several common problems are
(BCD) or dry suit (the valve does not
encountered when deploying deco
retain the hose connector, like the BCD
buoys.
or suit inflator valve,
1. The diving reel jams after the buoy is
and the hose can be easily pulled off the
inflated (dragging the diver up). To avoid
valve when the buoy is sufficiently filled);
this, a diver can: use a simpler system or
3. holding an open ended buoy above
a reel which cannot jam (e.g. EZDIVE
3