Download PL-P4-SWP Installation

Swimpure Plus with Controls Programming Flow Chart
default menu
620 Division St.
Elizabeth, NJ 07207
day and time
water temperature
air temperature
chlorinator setting
salt level
reason pump is running (not scheduled)
inspect cell
reason hi-speed is running (not scheduled)
countdown time remaining
heater control status
system manual off
check system error
filter vsp speed/reason
lights/aux speed/reason
pH/ORP levels
settings menu
spa heater1 temperature
pool heater1 temperature
spa solar temperature
pool solar temperature
vsp speed settings
superchlorinate
spa chlorinator setting
pool chlorinator setting
day and time
backlit display light
beeper
teach wireless remote
wireless channel
maintenance menu
pH calibration wizard
clean probe wizard
timers menu
pool filter 1 or hi-speed 1
pool filter 2 or lo-speed 1
pool filter 3 or hi-speed 2
pool filter 4 or lo-speed 2
spa
lights
aux1
aux2
valve3
superchlorinate
diagnostic menu
chlorinator diagnostics
instant salt
pH/orp levels
flow switch
cell temperature sensor
water/pool sensor
air sensor
solar sensor
vsp speed/power
main software revision
display software revision
chemistry sense module software
vsp software revision
RF base software revision
6 button spa side software revision
configuration menu
chlorinator
chemistry config. Wizard
pool/spa
filter
heater1
solar
external input active state
lights
aux1
aux2
valve3
6 button spa side remote
remote menus
7-day or weekend/weekday timeclock
12 hour or 24 hour time format
ºF or ºC
vsp speed (% or rpm)
reset to default
denotes conditional items
®
Installation Manual
for model
PL-P4-SWP
092400A RevC
Copyright © 2011 Hayward
www.haywardnet.com