Download SPECTROMETER MK350 USER MANUAL

Assembly
Insert SD card as below:
Physical Description
WWW.MK350.COM
3.5” touch screen
Lin-ion battery
SD card slot
Reset key
Power key
Power jack
Mini USB
Sensor cover
Installing cover strap:
step1. Unscrew the strap
step2. Tie strap to the holder
step3. Tie strap to the sensor cover
step4. Screw the strap
Capture key
SPECTROMETER MK350 USER MANUAL
Case
MK350
Battery
USB cable
Power adaptor
SPECTURM MK350 MANUAL
Battery cover
Accessory - 1
Li-ion battery installation:
step1. Remove battery cover
step2. Install Li-ion battery as below
step3. Put battery cover back
Accessory - 2
Charging the SPECTRUM MK350:
Please plug AC adaptor into power jack
Transferring data:
Connect mini USB to your PC
note：MK350 saves raw data only
Manual
Guarantee
Protective membrane
Strap
Neck strap
SPECIFICATIONS
Spectral Bandwidth/Resolution
Wavelength Range
Digital Resolution
Wavelength Data Increment
Color Accuracy
Color Repeatability
Operating Temperature Range
Storage Temperature Range
Date Output Interface
Display
Battery
Dimension
Weight (Including battery)
Measurement Capabilities
Illuminance Meter Function
12 nm
360 ~ 750 nm
16 bits
1 nm
xy: ±0.002
xy: ±0.0005
0 ~ 35°C
-10 ~ 45°C
SD, USB 2.0 (Support mass storage only)
3.5" LCD 320X240 Touch Panel
2500mAh / Reachargeable Li-ion Battery
144.2 x 78.0 x 24.0 mm
250g ± 20g
1.Spectral Irradiance
2.C.I.E Chromaticity Coordinates
(1) C.I.E 1931 x,y Coordinates
(2) C.I.E 1976 U.C.S u',v' Coordinates
3.Peak Wavelength
4.Correlated Color Temperature;CCT (in Kelvins)
5.Color Rendering Index;Ra (Rendering Average)
6.Illuminance / Lux
Conditional support measure illumiance under 30°
from 70 to 70,000LUX
Sleeve
Home Index Icons
Measurement Modes
Interface
Measurement
means button
SIMPLE
WWW.MK350.COM
1
2
3
4
SPECTRUM
5
CIE1931
SIMPLE
SPECTRUM
CIE1931
CIE1976
CIE1976
6
System Settings - 1
System Settings - 2
Backlight
+ / - : selection
Language
Language selection
Initial
Power Saving
Calculation
Measurement Settings - 2
Save File
1
+ / - : selection
Date
Integration Mode
SSave data into SD card
Main menu settings
1. Settings
2. Next page
3. Return
4. Previous page
file?
File Name:
SD Card Fail !
ESPD2012215174412.XLS
4
Time
+ / - : selection
5
6
Storage
2
3
4
5
Total Size : 2 G
6
Version
S
HW/SW/Optical
infomation
Battery
Power capability
HW NO. : 1.0.1
FW NO. : 0.0.1
7
8
Optical NO. : A11J0231
Capture Mode
SSingle capture or continue capture
SStorage infomation
Free Size : 872 MB
Submenu settings
5. Setting item
6. Setting content
7. Confirm
8. Deny
* Only Manual mode can adjust
integration time.
+ / - : selection
Integration Time
3
Auto mode or manual mode
Do you want to save
+ / - : selection
2
Display result
Step 1 : Point sensor head towards light source
Step 2 : Push the button
Step 3 : Read data measurement on screen
Measurement Settings -
Main menu settings
1. Settings
2. Next page
3. Return
4. Previous page
with a beep
8
1. Measurement mode – SIMPLE/ SPECTRUM/ CIE1931/ CIE1976
2. Integration mode – Auto/ Manual
3. Capture mode – Once/ Continuous
4. Battery power
5. Data display
6. Measurement settings
7. Return to home screen
8. Data saving
System Setting
1
7
Submenu settings
5. Setting item
6. Setting content
7. Confirm
8. Deny
Buzzer
Dark Calibration
User calibration
Put the sensor cover
on the MK350N
Dark Calibration ok!
Cap : 86%
7
8
Dark Calibration Fail!