1
Download VT595 User Manual
Transcript
VT595 User Manual VT-ENG-595-V1 20120313 1. Parts and Functions 49mm 27.6 mm Speaker 137.5mm Camera Lens Night View LED 27.6mm Call Button Microphone 2. Terminal Descriptions N.O COM 4B 3Y 2W 1R •• •• •• •• •• 1R (Red): Power positive. +12V present when Door Station calling or being monitored. 2W (White): Power negative (Ground). 3Y (Yellow): Image signal (Video signal). 4B (Black): Talk and control signal (Audio signal). COM(Blue),N.o(Green):Normally opened connection port. -1- 3. Mounting 3.1 Mounting Without Rainy Cover 1 2 3 PA3*25 TX20-4*10 3.2 With Rainy Cover and 30 degree angle 1 2 3 PA4*25 PM3*12 TX20-4*10 Note:Both rainy cover and 30 degree angle accessories are supplied seperately. -2- 4 4. System Wiring and Connections 4.1 Basic Connection Red White Yellow Black 1R 2W 3Y 4B Black Red White Yellow TO Monitor JS_OS1 Shielding Layer of the RVVP Cable 4.2 Electric Lock Connection •• Mode1:Door Lock Controlled With External Power Indoor Monitor Connection Port Note: 1.Electronic lock of power-on-to-unlock shoule be used. 2.The inside relay contact is restricted to DC 24V/1A. + Black Green Blue Red White Yellow 1R 2W 3Y 4B + - - -3- •• Mode2:Door Lock Controlled With Internal Power Indoor Monitor Connection Port Note: 1.Electronic lock of power-on-to-unlock shoule be used. 2.The door lock is limited to 12V,and holding current must be less than 250mA Green Blue Yellow Black White Red 1R 2W 3Y 4B + 5. Precautions •• Do not install camera/bell where there would be a bright light behind the visitor (or where there would be a bright background), or in a place where the camera lens would be directly exposed to sunlight or a bright light. If light shines directly into the outdoor camera lens, the image will be overexposed; it will look white or silhouetted. Take precautions against this. •• Do not install the unit in places where High or extreme cold temperature, moisture or humidity extremes, Constant vibration or impact, steam or smoke. 6. Specifications Power Supply: Consumption: Video Output: Camera Lens: Working Temperature: Dimension: DC 10~12V (powered by monitor) 150mA in working state (latch not included) 75Ohm, 1Vp-p 1/4 ACS 4T image sensor with DSP processor -10ºC ~ 40ºC 137(H)x49(W)x28(D)mm -4-
