Download Companion Of Mobile Phone User manual

Companion Of Mobile Phone
User manual
Read the user manual before you use please.
Introduction
Thanks for you choice our Bluetooth bracelet firstly.
User guide include functions/operations/procedures,
please read carefully to best use, and don’t damage
the bracelet. Do not change the parts and
disassemble and assemble，and not be guaranteed.
Package ：bracelet、USB charger clip 、charger、
manual .
Functions:
vibrate when call come
call id
prevent mobile lose
clock
User guide
1
1.
sketch map(Picture 1)
2.
Charge
Bracelet bulid-in rechargeable lithium polymer
battery，please charge 3 hours before first use.
USB charge clip one port connect to USB charger
port, clip connect with bracelet charger points,
OLED screen will show charging sign.
2
3.
Turn on/off
Push button B 3s to turn on/off the bracelet.
Screen show “power on” when turn on the
bracelet.
Screen show “power off” when turn off the
bracelet.
4. Pairing
Need to pair bracelet with mobile when use the
bracelet first time.
Push the button B 5s when bracelet is turn off,
screen show “
Pairing” .
Turn on the mobile Bluetooth.
3
5.
Open the mobile Bluetooth search device
function.
Mobile will find out bracelet
“
”, choice this device
and confirm connecting.
Mobile ask pairing code, put into code“0000”
to
connect.
Mobile ask confirmation, Push “OK” to connect.
Bracelet screen show “” mean connect
successful, bracelet will vibrate one time indicate
pairing success.
Time adjust.
Push button A 3s set up time when bracelet turn
on.
Screen show hour flash, Push button B to set up
right time.；
Short push button A to minute flash, push button
B to set up right time,
After finish setting up minute, Push button A to
finish time adjusting.
Push any buttons to light screen show clock time.
4
6.
7.
8.
Vibrate when call come and show caller’s ID
Bracelet will vibrate continue when mobile have
call coming.
Bracelet will show caller ID
Vibrate will stop when use mobile take the call.
Or reject the call.
User can push the button B 3 times to reject the
call .
Prevent mobile lose
Bracelet will vibrate when the distance is more
than 10m between the mobile with bracelet.
The distance will be near on somewhere.
Push any buttons to stop vibrate.
Disconnect and connect
Bracelet will vibrate 3 times disconnect with
mobile, interval time is 3s, and will connect with
mobile initiative.
Bracelet will connect mobile 10 minutes each
time after first time connect initiative, if can’t
connect success bracelet will vibrate one time
5
until connect success or push button to stop
connecting.
Push button B to connect mobile initiative when
bracelet is disconnect with mobile.
9. Bracelet reset
User can charge the bracelet to reset when
screen can’t not light, disconnect with mobile, etc.
10. Wear skill
Keep the back of hand up, keep the opening of
bracelet forward to the side of band.
（Picture 2）
Slide the bracelet to right place of hand.（Picture
3）
6
11. Service
Warranty time is 1 year.
Specification
Bluetooth Version：V2.1
Voltage：3.6V-4.2V
Current：45mA
Frequency：2.4GHz
Charge time：2 hours
Standby time：72 hours
Battery：Lithium Polymer
Charger specification
Input Voltage：110～240V
Frequency：50Hz
Input current：0.15A
Output Voltage：5.7V
Output current：600mA
7
Safety guide ：
Don’t clean the bracelet with corrosiveness
solvent.
Don’t keep the bracelet in high temperature
place.
Don’t keep the bracelet in wet place.
Don’t disassemble and assemble.
Charge the bracelet with right way.
Don’t put the bracelet into water.
8