Download CHRONOPRINTER 545 User Manual

5. Menu description before opening up a new run
These menus are available before a Run is opened. Several menus can be found wholly or partially in the Run
Menu (see chapter 21).
To navigate the menus, press F. To select an option use the ▼and ▲keys and confirm with ◄┘.
At any time it is possible to exit menus by pressing the F key the number of times necessary to return to the
main menu.
5.1.
Power OFF CP 545
Switch OFF the device
5.2.
Op/New Run
Start a new timing session after having closed the previous run.
5.3.
Manual or External Synchronisation
Wh/the CP 545 is powered ON, the memorised Time of Day and Date proposed is the one used during
the last timing session.
Use Synchronise Manual for a new Time of Day setting or to synchronize with other systems to a pre-set
Time of Day. (Do not forget to introduce the Date)
It is also possible to synchronize the time from 00:00 (only in SPLIT and SPLIT/LAP mode) wh/a restart
back to zero may be required
Master/Slave
La selection “Master/Slave” wh/we connect together via RS232, two Chronoprinter 545.
5.4.
Clear Memory
Use only wh/you start a new timing session and you are sure you do not need to retain previous runs in
the device’s memory!
5.5.
Rank a RUN of a single run,
Rank a single run or the addition of two or more runs
(Example: ranking from the addition of 3 runs)
List of runs
► 03 + 02 T
General ranking from the addition of run 03 and 02 T
► 03
Ranking of run 03 (added to run 02 T)
► 02 + 01
General ranking from the addition of runs 02 and 01
► 02
(calls it 02 T)
► 01
Ranking of run 02 (added to run 01)
Ranking of only run 01
Or with 2 run added (ex 03 + 01). First select one of the 2 runs.
TAG Heuer Timing
Page 8 / 49