Download Matrox Monarch HD User Guide

Transcript
51
Control buttons
The following table details the different states of the control buttons in the
Command Center.
¦ Note Depending on the selected operating mode (see “Monarch HD operating
modes” on page 28), stream or record functionality may not be available.
Stream
Button
Function
Start
stream
(RTMP)
This button indicates that the Monarch HD device is
set to stream in RTMP mode. Click this button to
start streaming the input source connected to
Monarch HD’s HDMI input. If controlling multiple
Monarch HD devices, those devices set to stream in
RTMP mode will begin to stream their input sources
as well.
Stop
stream
(RTMP)
This button indicates that the Monarch HD device is
currently streaming in RTMP mode. Click this
button to stop streaming. If controlling multiple
Monarch HD devices, those devices set to stream in
RTMP mode will stop streaming as well. The
devices on the network that are streaming in RTSP
mode will continue to stream.
This button indicates that the Monarch HD device is
currently set to stream in RTSP mode. In RTSP
Streaming mode, the unit delivers stream data once a client
(RTSP) connects to Monarch HD using the RTSP streaming
protocol, and therefore does not require you to click
the Stream button to start streaming.
Record
Stream
disabled
Indicates that Monarch HD is currently set to
Record-only operating mode.
Click this button to start recording the input source
connected to Monarch HD’s HDMI input. If
controlling multiple Monarch HD devices, those
Start record
devices will begin to record their input sources as
well.
Command Center Control page