Download Invacare ® TDX-SP / TDX

Transcript
Invacare ® - TDX-SP / TDX-SP N
9
Installing accessories
9.1
Replacing the safety belt
SERVICE MANUAL
Requirements:
● open-ended spanner, 13 mm
● 5 mm Allen key
Note
A nut is fixed between the two washers (2) and (4) as a spacer so that the belt mounting can
rotate freely.
●
Remove the plastic cap (5).
●
Loosen the bolt (3) and the associated
nut (in the figure this is covered by the
plastic cap) with a 5 mm Allen key and a
13 mm socket spanner.
●
Remove the nut.
●
Remove the bolt including safety belt and
flat washers (2) and (4).
●
Remove the flat washers (4).
●
Replace the safety belt (1).
●
Refit the parts in the reverse order.
177