Download INSTALLATION, OPERATING AND MAINTENANCE MANUAL

Price ® Pump Co.
INSTALLATION, OPERATING
AND MAINTENANCE MANUAL
AIR OPERATED DIAPHRAGM PUMPS
METALLIC,BOLTED, ALL ELASTOMERS
MODEL:
1.5 AOD-XXXX-B
PLEASE FILL IN FROM PUMP NAMEPLATE
Pump Model______________________
Spec. No._________________________
Serial No._________________________
Price ®
Pump Company
21775 8th. Street East
Sonoma, CA 95476
Tel: 707-938-8441
Fax 707-938-0764
Email: [email protected]
RETAIN MANUAL FOR REFERENCE
IN-AOD-150M-B rev. A
Co ngratulations
You are now the ow ner of a Price® Pum p Co. Air Ope rated Diaphragm Pum p. This pum p w as care fully
inspe cted and subje cted to final perform ance tests before relea sing for shipme nt. In orde r to achieve
m aximum perform ance and reliability, plea se follow the simple instructions in this manual.
RECO M M EN DED P REC A U TION S
1 . For sa tis fa ct or y ope r at io n an d s afe ty , m a xim u m inle t air pr e ssur e m us t not e xce e d 1 2 5 p si (8 .7 9 kg/ sq c m ).
2 . N o m odifica tion s, a dd itions or de let ions sh ould be m a de t o the pum p w it ho ut pr io r ap pr ova l o f t he fa ct ory .
3 . Dr a in c as in g co m p le t ely a nd flush w it h w a te r b efo re s er vic ing a pum p ha nd lin g vola tile or har m ful liqu id s.
R EAD CAR EFU LLY TH E CAU TIO N BELO W
The pe rformanc e of your Price® Co. Air Ope rate d D iaphragm Pump is ba sed on cle an, room te mpe ra ture ,
w ater w ith suction conditions as show n on the perform ance curves. If used to pum p other liquids, pum p
perform ance m ay differ from rated perform ance base d on the differe nt specific gravity, tem perature,
viscosity, e tc. of the liquid being pumped. A standard pump, how e ve r, may not be safe for pum ping all type s
of liquids, such as toxic, volatile or che mical liquids, or liquids under extre me te mpe ratures or pre ssures.
Please consult Price® Pum p catalogs as w ell as local code s and gene ral re fere nces to dete rmine the
appropriate pump for your particula r application. Since it is im possible for us to anticipate e ve ry application
of a Price® pum p, if you plan to use the pump for a non-w ater application, contact Pric e® Pum p be forehand to
dete rm ine w hethe r such application m ay be proper and safe under the circumstance s. Failure to do so could
result in property dam age or personal harm .
Visit our w ebsite for product inform ation and technical support
w w w .pricepum p.com
Page - 2
IN-AOD-150M-B rev. A
OPERATING INSTRUCTIONS
AIR OPERATED DIAPHRAGM PUMPS
BOLTED, ALL ELASTOMERS
IN STA L LA TIO N
A I R SU P P LY
Bo lt p u m p to a m o u n t in g p ad u sin g ap p ro p riate ly size d
d iam et er b o lts . Ru b b e r v ib r atio n in su la to r s sh o u ld b e
u se d b e tw e e n th e p u m p m o u n tin g fee t an d m o u n tin g
p a d t o r ed u ce p u m p v ib ra tio n s a n d stre sse s. In
p e rm an e n t in sta llatio n s th e p u m p sh o u ld n o t b e
d ire c tly at tac h e d to r ig id p ip in g, b u t in ste ad sh o u ld b e
c o n n e c ted th ro u g h flex ib le h o se s o r e q u iv a le n t o n b o th
th e su c tio n a n d d isc h a rge . T h is sh o u ld b e d o n e to
Th e in le t to th e a ir v a lv e is a fe m a le N P T . T h e a ir su p p ly
re d u c e p ip e stre sse s an d v ib r atio n s w h ich a re
c h ar ac te ristic o f th e re cip ro ca tin g n atu re o f th e p u m p .
A su rge su p p r e sso r m a y b e re q u ire d o n t h e d isch arg e
lin e o f th e p u m p if fu rt h e r r ed u ct io n in v ib ra tio n o r a
re d u c tio n o f p u lsa tio n in th e d isc h ar ge flo w is d e sire d .
If th e p u m p is u se d in a su b m e rg ed ap p lica tio n a lin e o r
h o s e sh o u ld b e at tac h e d to t h e p u m p a ir e x h au st t o
p r ev e n t liq u id fr o m e n te rin g th e a ir v a lv e w h e n t h e
p u m p is sh u td o w n o r o p e rat in g a t lo w d isch arg e h e ad s.
C A R E M U ST B E E X ER C ISED W H E N SU B M E RG IN G T H E
P U M P IN C O RR O SIV E P U M P IN G M E D IA .
Su c tio n an d d isch arg e p ip e size sh o u ld b e a t le ast e q u al
to th e in le t p ip e d ia m e te r o r la rg er . L ar ge r, if h igh ly
v isco u s liq u id is to b e p u m p e d o r lo n g le n g th s o f p ip e
ar e u se d . W h e n u sin g su c tio n h o se s u se th e n o n c o llap sin g r e in fo r ce d t y p e , sin ce th is p u m p is ca p ab le o f
p r o d u c in g h igh v a cu u m a t t h e su c tio n in le t.
SO LI DS -HA N D LI N G C A P A BIL IT Y
P r ic e® P u m p A ir O p e ra te d D ia p h r agm P u m p s w ill p a ss
th e fo llo w in g sp h e rica l so lid sizes :
M odel
P ar tic u la te S iz e
1 .5 A O D -X X X X -B
3 /1 6 ” D ia . (4 .7 m m )
2 .0 A O D -X X X X -B
3 /8 ” D ia . (9 .5m m )
3 .0 A O D -X X X X -B
7 /1 6 ” D ia . (1 1m m )
If th e p o ssib ility ex ists th at la rg er s ize d so lid s m a y b e
su sp e n d ed o r c ar ried a lo n g b y th e p u m p in g m e d ia,
in sta ll a st rain e r o n th e su c tio n lin e w ith sm a lle r s ize d
h o le s t h an th e allo w a b le so lid size . Th is w ill p r ev e n t th e
larg e r so lid s fr o m e n te rin g th e p u m p an d in te rfe rin g
w ith o p e ra tio n o f th e p u m p b all v a lv e s.
lin e s h o u ld b e size d ac co rd in gly s o th at th e re is n o
re str ic tio n le ss th an in le t p ip e size.
N O T E: Lo n g a ir lin es re q u ire la rge r d iam et er s to
m in im ize a ir sy ste m p r ess u re lo ss to in s u re t h e re q u ire d
air p re ssu re a n d flo w ra te at th e p u m p a ir in le t. It is safe
to u se u p to 1 2 5 p sig (8 .7 9 kg/ sq c m ) fo r p u m p in g
re q u ire m e n t s.
W A R N IN G : DO N O T E XC EE D 1 2 5 P SIG (8 .7 9 KG / SQ C M )
A I R SU P P LY P R E SSU R E A S C O M P O N EN T D A M A G E O R
P E R SO N A L IN JU R Y M A Y RE SU L T .
P U M P C O N TR O L
Th e p u m p o p e rat in g c o n d itio n s, flo w (G P M ) an d
d isch a rg e h e ad (P SIG ) ca n b e co n tro lled in t h e fo llo w in g
m a nner
1 . T h ro ttlin g th e p u m p d isch arg e b y m e an s o f a v alv e o n
th e d isc h a rge lin e . W h e n th e p u m p d isc h ar ge p re ssu re
e q u als th e a ir su p p ly p re ssu r e , th e p u m p w ill st o p . T h is
w ill n o t h a rm t h e p u m p ; h o w e v er , d o n o t e x ce e d 1 2 5
p sig (8 .7 9 k g/ sq cm ) a ir s up p ly p r ess u re . T h e p u m p m ay
b e in th is m o d e in d e fin ite ly . By o p e n in g th e d isc h ar ge
v alv e t h e p u m p w ill re su m e p u m p in g .
2 . T h e a ir p r e ssu re su p p ly c an b e lim it ed to th e p u m p .
P ric e® P u m p re c o m m en d s th e in stallatio n o f a P r ic e®
P u m p a ir filte r/p re ssu re re gu lat o r fo r all A O D
ap p lica tio n s. A glo b e o r gat e v a lv e c an b e u sed b e fo re
th e re gu lato r fo r o n o r o ff co n tro l. Fa ilu r e to u se a n air
p re ssu re r eg u la to r w ill ca u se th e p u m p a ir in le t
p re ssu re a n d th u s d isc h a rge p re ssu r e to c lim b to
m a x im u m air sy ste m p re ssu r e w h e n th e p u m p is
sto p p e d .
M I N IM U M A IR SU P P LY P R ES SU R E
Th is air v alv e in co rp o r ate s a sta ll-fr ee d es ign a n d w ill
b e gin o p e rat in g w ith air in le t p re ssu re s as lo w a s 5 p sig
(.3 5 k g/ sq cm ).
IN-AOD-150M-B rev. A
Page - 3
O P E R AT I N G I N S T R U C T I O N S
O P ER A TIN G IN ST RU C TIO N S
T h e p u m p air v alv e is o f a n o ille ss d e sig n ; t h at is, n o
lu b rica tio n is re q u ire d o r re c o m m en d ed . A clea n , d ry air
su p p ly sh o u ld b e p r o v id ed fo r o p tim u m air v alv e
o p e r atio n an d life . In co ld w ea th e r o p e ra tio n , o r u n d e r
c o n d itio n s o f h igh p u m p d isch arg e p r es su re a n d
re lativ e ly h igh h u m id ity , a ir v a lv e fr ee zin g m a y o c c u r as
a re su lt o f m o ist u re in th e c o m p re sse d a ir b ein g
re le ase d . If th is o c c u rs, a n ti-fr ee ze , o f th e et h y le n e
gly c o l ty p e , m ay b e u s ed in a m e a su rin g d isp e n se r, s u ch
as a n a ir lin e lu b rica to r at th e p u m p a ir in le t. Th e
re su ltin g m ist w ill k e ep th e air v alv e fre e o f ic e b u ild -u p .
1 . In c ase s w h er e th e r e ar e se v e ral air-o p e ra te d
d iap h r ag m p u m p s b e in g u se d sim u lta n e o u sly a n d
fre e zin g o f th e air v alv e o cc u rs fre q u e n t ly d u e to
e x ce ssiv e m o istu r e in t h e c o m p re sse d a ir sy st em , it m ay
b e a d v a n ta geo u s t o in sta ll a d esic ca n t t y p e c o m p r e ssed
air d r y er in th e a ir sy st em to p u rge th e a ir su p p ly o f
u n w a n te d m o istu r e .
Fo r p er m a n e n t in sta llat io n s, an a ir filte r an d w a te r/ o il
se p ar ato r sh o u ld b e u se d . T h is is alw ay s go o d p r ac tice ,
sin ce it in su re s m a xim u m life o f th e a ir v alv e m o v in g
p a rts an d se a ls b y k e e p in g th e m cle an o f d irt an d o il
re sid u e .
E xc e ssiv e o il an d w at er in th e in le t a ir su p p ly w ill c au se
a v a rn ish -lik e su b stan c e to fo r m o n t h e se lf-lu b rica te d
v a lv e s p o o l. T h is w ill e v e n tu a lly le ad to v alv e sp o o l
"st ic k in g* a n d r e su lt in e r rat ic sp o o l o p e r atio n . Sh o u ld
th is o cc u r , th e sp o o l a n d h o u sin g b o r e m a y b e clea n e d
w ith a co m m e rc ial sa fe ty so lv en t.
2 . W h e n sta rtin g th e p u m p , m ak e su re all v alv in g o n t h e
su c tio n an d d isch arg e lin e s a re o p e n . T h e p u m p w ill n o t
p r im e w ith th e v a lv in g clo se d . P u m p ca v it atio n w ill
o c c u r if t h e su c tio n lin e is r est ricte d w it h fo r eign
m atte r , u se a s u ctio n str ain er w ith h o le size less th an
allo w a b le s o lid s ize fo r m o d e l in q u est io n .
3 . W h e n p u m p in g h igh ly v isc o u s m a te rials, it is
ad v isa b le to ch e c k t h e p u m p flo w r at e v s. t h e p u m p
str o k e r ate .
P U M P M O D EL
A V G . G A L S. P E R ST R O K E*
Std . Elasto m e rs
T e flo n E la sto m e rs
1 .5 A O D -X X X X -B
.3 5 (1 .3 L )
.2 0 (.7 5 L )
2 .0 A O D -X X X X -B
.8 5 (3 .2 L )
.8 0 (3 .0 L )
3 .0 A O D -X X X X -B
.8 .7 (3 .3 L )
.8 2 (3 .1 L )
O n e p u m p str o k e is e q u al to o n e ex h a u st d isc h a rge .
Th e p u m p sh o u ld n o t p u m p fa ste r th a n t h e m ate rial is
ca p a b le o f b e in g d ra w n in to th e p u m p in le t. If th is
o c cu rs, c av ita tio n w ill o cc u r an d c o u ld d am age to t h e
pum p.
4 . T o d e ter m in e m ax im u m p u m p in g sp e e d , in c re as e air
su p p ly p re ssu r e w h ile o b se rv in g p u m p d isc h ar ge
in cr ea se . W h e n d isc h a rge flo w n o lo n g er in c re ase s,
th r o ttle b a ck air u n til p u m p d isc h ar ge flo w star ts t o fall
o ff. T h is p o in t is th e o p tim u m p u m p in g sp e ed
ac h iev ab le u n d e r th o se co n tro lle d b y e ith er o n e o f t h e
tw o m e th o d s p re v io u sly m e n tio n e d u n d e r th e P UM P
C O N T R O L se ct io n o f t h is m a n u al.
5 . T h e p um p air ex h a u st p o rt sh o u ld b e k ep t fre e fro m
b lo ck age . T h e p u m p sh o u ld n e v er b e o p e ra te d
su b m e rge d w it h o u t in stallin g a lin e t o t h e e x h au st p o rt
an d d ire c tin g t h e sa m e a b o v e th e liq u id su rfac e . A n
ap p ro p r ia te ly size d h o se w it h a 1 /2 " m a le N P T
co n n e ct o r m ay b e p ip e d u p to th e e x h au s t p o rt an d
d ire ct ed aw ay . T h e e x h a u st lin e , if re q u ire d , sh o u ld be
k e p t as sh o rt a s p o ssib le o r p u m p p e rfo rm an ce c o u ld b e
affe cte d . If lo n g le n gt h s o f ex h a u st lin e a re n ec e ssar y ,
in cr ea se th e in ter n al d ia m e te r o f th e e xh au st lin e t o
m in im ize p r es su re d r o p an d p u m p p er fo rm an c e lo ss. If
th e ex h a u st so u n d le v e l b e co m e s t o o o b jec tio n a b le , u s e
th e air m u ffle r p ro v id e d .
N O TE : In sta llin g a n a ir e x h au s t m u ffle r o n a su b m e rg ed
p u m p w ill n o t p re v e n t th e liq u id in w h ic h t h e p u m p is
su b m e rge d , fr o m e n te rin g th e a ir v a lv e .
C A U TI O N : If a d ia p h ra gm failu r e o c cu r s, t h e p u m p in g
m e d ia m a y b e b lo w n o u t th e e x h au st p o r t. T h is c o u ld b e
h az ard o u s if th e p u m p in g m e d ia is to x ic o r agg re ssiv e . It
is a d v isa b le to ad d a lin e t o t h e e xh au st p o r t an d d ire ct
it sa fely a w ay w h e n p u m p in g to xic o r ag gre ssiv e m ed ia .
6 . D ra in p u m p a n d flu sh afte r u se w h en p u m p in g
m a te rial w h ic h c an p a ck , set tle o u t o f liq u id su sp e n sio n ,
o r so lid ify in tim e . A p ac k ed p u m p ca n c a u se d am ag e to
th e d ia p h ra gm c la m p in g p late s an d p u m p sh aft w h e n
sta rte d afte r a p e rio d o f in te rru p te d u se. Th e p u m p m a y
b e in v e rte d an d d r ain e d t h ro u g h t h e d isc h ar ge p o r t an d
flu sh ed th r o u g h t h e su c tio n p o rt.
O P ER A T IN G T EM P E RA T U RE
A O D -X X XX -B W e tte d P a r ts
Th e p u m p sh o u ld n o t b e u se d t o p u m p liq u id s ab o v e
1 8 0 °F (8 2 °C ). Fo r o p er atin g te m p er atu re s a b o v e 1 8 0 °F
(8 2 °C ) c o n s u lt fac to r y .
* A ct u al te st d a ta w it h flo o d e d su ct io n a n d s p ec ific
gr av ity o f 1 .0 .
Page - 4
IN-AOD-150M-B rev. A
TROUBLESHOOTING
T R O U B L ESH O O T IN G
1 . P u m p w ill run b ut w ill not pu m p .
5 . Se ve r e pu m p v ib ra tion w ith inte r m it te nt flow .
a . C h e ck su ct io n lin e fo r le aks.
a . R u p tu r ed d iap h rag m - d isasse m b le p u m p , re p lac e
d iap h ra gm an d c le a n a ir va lve if n e c e ssar y.
b . T igh te n b o lts o r c la m p s o n su c tio n m an ifo ld o f
p u m p s.
c . M ate r ia l to o visc o u s to p u m p a t h ig h r ate o f flo w slo w d o w n p u m p b y r ed u cin g air su p p ly p re ssu re to
p u m p o r u se la rge r d iam e te r su c tio n lin e .
b . M e c h an ica l failu r e - d isa sse m b le p u m p a n d
in sp e c t fo r b e n t sh a ft , r u p tu re d d iap h r ag m , o th e r
p a rt failu r e .
6 . P um pin g m e dia le a king fr om e xha us t por t.
d . Su c tio n m an ifo ld & p u m p ch a m b er s m isa lign e d d isa sse m b le & r ea lign .
a . R u p tu r ed d iap h rag m - d isasse m b le p u m p , re p lac e
d iap h ra gm - c le a n a ir va lve if n e c es sary .
e . Su ct io n o r d isc h ar ge b a lls ja m m ed o p e n w it h
fo r e ign o b je ct - d isa sse m b le p u m p an d re m o v e
fo r e ign o b je ct .
7 . V a ry ing pum p disc ha rg e pe r st rok e .
N O T E: O p tim u m p r im in g sp e e d fo r t h e se p u m p s is
o b tain e d w h e n a ir in let p r essu re is m ain ta in ed
b e t w ee n 1 5 -2 0 p si, (1.0 -1 .4 kg/c m 2 ) w ith o p e n
p u m p d isch a rg e.
2 . A ir b ubb le s in pum p disc ha rg e line
a . C h e ck su ct io n lin e an d m a n ifo ld b o lts o r clam p s
fo r le aks.
b . C r ac ke d o r r u p tu re d d iap h rag m .
3 . Int e rm itte n t pum p ope r at io n an d/ or ice blow ing
fr om e xh au st por t.
a . R em o ve su c tio n m a n ifo ld a n d ch e c k fo r
o b stru ctio n s.
b . W o rn o r lea ky b all valve s & se at s - d isa sse m b le
p u m p an d re p lac e w o r n p art s.
c . C h ec k to ver ify b o lts a re fas te n e d tigh t ly an d re to rq u e if n ec e ssar y.
8 . Slow ing of pum ping ac tion
a . C lo g ge d a ir e x h au s t m u ffle r – cle an o r re p lac e
b . Ice b u ild u p in a ir va lve - in st all d e -ic in g d e vice o n
a ir in le t lin e .
a . R em o ve o b str u ctio n fro m su c tio n lin e .
b . V alve fre e ze -u p - in st all d e-icin g d e vice o n a ir in le t
lin e o r su ita b le air d rye r in co m p r e ssed a ir lin e .
c . S tic ky air v alve - re m o ve m ain sp o o l & c le an w ith
sa fet y so lve n t.
4 . P u m p st ops pu m p ing.
a . In c re a se air su p p ly p re ssu re b u t D O N O T ex ce e d
1 2 5 psig (8 .7 9 kg /c m 2 ) u n d e r a n y c ir cu m sta n ce s an d
c h e ck fo r o b st ru c tio n in su ct io n o r d isc h ar ge lin e.
b . Sp o o l stickin g - r em o ve m ain sp o o l & c le a n w ith
sa fet y so lve n t - in sta ll su itab le filt er o n a ir in le t if d ir t
o r co n tam in a n ts p e rsist.
c . A ir va lve ice -u p - e xc e ss m o istu re o n th e m u ffle r is
a n in d ic atio n th at sign ific an t w a te r is p re se n t in th e
a ir su p p ly . D e p e n d in g o n th e d e gre e o f sev er ity , an
in lin e w a te r sep ara to r o r a ir d r ye r is re co m m en d ed .
IN-AOD-150M-B rev. A
Page - 5
R E PA I R A N D M A I N T E N A N C E
PU M P D ISA SSE M B L Y IN ST RU CT IO N S
A O D -XX XX -B (Bo lte d De sig n) A LL E L A ST O M E RS
P r ior to d isas se m b ly o f a n y A O D p u m p follo w th e
“ ca u tio n ” b e lo w .
CA U T IO N ; D o no t atte m p t t o p er fo rm a ny m ain te n an c e
o r r e p air o n t h e a ir o p e ra te d d ia p h ra gm p u m p s u n til th e
c om p r e ssed a ir lin e to th e p u m p an d p u m p d isc h ar ge
lin e h as b e e n sh u t o ff, b le d d ow n , a n d d is co n n ec te d . In
ad d it io n , w h e n p u m p s a re b e in g u se d to p u m p tox ic o r
ag gre ssive m e d ia th e p u m p s sh o u ld b e flu sh e d cle an
p r ior to d isa ssem b ly.
1 . P u m p sh o u ld b e d isasse m b le d in th e n o rm al u p r ig h t
p o s itio n . Re m ov e th e d isc h ar ge m an ifold b y re m ov in g
th e ca p sc re w s an d loc k w a sh e rs.
8 . P lac e th e h e x h e ad o f o n e o f t h e o u te r d iap h ra gm
p late s (o r ESN A n u t) in a tab le vise a n d re m ove th e
o p p o sin g o u te r d ia p h ra gm p late (o r EA SA n u t ) u sin g a
soc ke t, b o x w re n c h , o r a d ju sta b le w re n c h . If a vise is
n o t av aila b le t w o w re n c h es c an b e u se d . Re m o ve th e
d iap h r agm , in n e r d iap h r ag m p la te , a n d b u m p e r.
9 . R em ove p u m p sh aft an d r em ain in g d ia p h ra gm
ass em b ly (still a ttac h e d ) fro m p u m p b y slid in g th ro u gh
th e sle e ve b e ar in gs. P lac e fre e e n d of sh a ft in a soft
m e ta l jaw s vise (o r p la ce tw o b lo c ks o f w oo d b e tw ee n
th e vise ja w s t o p rote c t th e sh a ft ) an d re m ove th e ou te r
d iap h r agm p la te a n d t h e re m ain in g p a rt s.
1 0 . C h ec k b o th d iap h r agm s a n d ru b b e r b u m p e rs for
w e ar . Re p lac e if n e ce ssa ry. Ex c es sive ly w or n p art s w ill
ad v er se ly affec t p u m p p e rfo r m a n ce .
2 . R e m ove b all valve s, b a ll va lve sea ts an d o -rin gs
(Te flo n o n ly) fr o m Disc h ar ge M a n ifo ld .
1 1 . C h ec k s h aft sle e ve b e ar in g s a n d in n e r c la m p p late
for w e ar or m ec h an ic al d a m a ge . R ep la ce a n y w orn
p ar ts.
3 . T u r n t h e u n it u p sid e d o w n so th a t t h e su c tion
m an ifo ld is fac in g u p . R em ove t h e su c tio n m an ifold b y
re m ovin g t h e c ap scr e w s a n d loc k w ash e rs .
1 2 . R efe r to air v alve d isasse m b ly in s tru c tion s in th is
m a n u a l.
4 . R e m ove b all valve s, b a ll va lve sea ts an d o -rin gs
(Te flo n o n ly) fr o m b o th p u m p ch a m b e rs .
5 . C h e ck all b a ll va lve s, a n d b all valve se a ts for e x ce ssive
w e ar o r d ee p gou ges . Re p lac e if n e ce ssa ry. Ex c essive ly
w or n p art s w ill ad ve rs ely a ffe c t p um p p e rform an c e .
6 . T u r n u n it on it s sid e so th a t it is re stin g on on e o f th e
p u m p ch a m b e rs . Re m o ve th e ca p sc re w s, loc k w ash e rs
an d h e x n u ts faste n in g th e o t h e r p u m p ch am b er to its
air va lve h alf.
R em ove p u m p ch a m b e r . De p r e ss d iap h ra gm asse m b ly
in to th e a ir va lve h alf b y ge n tly p u sh in g o n th e o u t er
d iap h r ag m p la te .
7 . T u r n t h e u n it o ver so th at it is r est in g on th e air valve
h a lf a n d th e o th e r p u m p c h am b e r is fa c in g u p . Re m o ve
p u m p ch a m b e r p e r th e p re vio u s in str u ct ion s fro m st ep
#6.
Page - 6
IN-AOD-150M-B rev. A
R E PA I R A N D M A I N T E N A N C E
R E-A SSE M B L Y IN ST R U CTI O N S FO R
5 . D e p re ss on e of th e d iap h rag m asse m b lie s c om p le te ly
in to o n e of th e a ir va lve h alve s. Se t th is sid e flat o n to a
cle an fla t su rfac e so th a t t h e oth er d ia p h ra gm is fac in g
up.
A O D-X XX X-B (B olt ed D e sign)
A L L E LA ST O M ER S E XC EPT T E FLO N
1 . G e n tly in se rt th e p u m p sh a ft in to th e sle e ve b e ar in g
of th e a ir va lve h o u sin g, u n til th e last r ad iu se d e d g e of
th e p u m p sh aft ju st p a sse s th r ou gh th e sle e ve b e a rin g
se al. P u sh t h e p u m p sh aft b ac k t h rou g h t h e slee ve
b e ar in g se a l fro m th e o p p o site e n d a n d c e n te r th e
p u m p sh aft in th e air v alv e asse m b ly. Th e p u m p sh aft
sh o u ld m ov e fre e ly w ith ou t b in d in g .
2 . P lac e th e air valve a ssem b ly on a c le an fla t su rfac e .
Slid e a n e w r u b b e r b u m p er o n to sh aft. P lac e th e in n er
d iap h r ag m p la te o n to th e sh a ft w ith th e O -rin g groo ve
fac in g u p w ar d . P lac e d iap h rag m w it h t h e w or d s “ Flu id
Sid e ” fac in g u p w ard , aw ay fr o m th e a ir -valve asse m b ly.
A p p ly a fe w d ro p s o f Blu e -L o c tit e # 24 2 (o r eq u iva le n t)
to th e p u m p sh a ft th re ad s. T h re a d o n t h e ou te r
d iap h r ag m p la te (or E SN A N u t w ith d iap h r ag m p la te )
on t o p u m p sh a ft. “ H an d ” tigh t en th e ou te r d iap h r ag m
p late , b u t d o n o t torq u e d o w n c om p le te ly u n til late r in
th e asse m b ly p roc e ss.
3 . T u r n t h e air valve a ssem b ly ove r so th a t th e th r ea d e d
e n d o f th e sh a ft is p o in tin g u p w a rd . Slid e a n e w ru b b e r
b u m p e r o n to sh a ft . P la ce t h e in n e r d ia p h r agm p lat e
o n t o t h e sh a ft w ith th e O -r in g g ro o v e fa c in g u p w ard .
P lac e d iap h r ag m w ith th e w or d s “ Flu id Sid e” fa cin g
u p w a rd , aw ay fr o m th e a ir -v alve asse m b ly. A p p ly a fe w
d r op s of B lu e -Lo ctite # 2 4 2 (or e q u ivalen t) to th e p u m p
sh a ft t h re ad s . T h r ea d o n th e ou te r d iap h rag m p la te (or
E SN A N u t w ith d iap h r agm p lat e ) o n to p u m p sh aft.
“ Ha n d ” tigh t en th e o u te r d ia p h r agm p la te , b u t d o n o t
to rq u e d ow n com p lete ly u n til la te r in th e a sse m b ly
p r oce ss.
6 . C are fu lly alig n t h e o u te r b e ad o f th e d iap h ra gm w ith
th e groo ve on th e a ir va lve h alf. P lac e th e p u m p
ch am b e r o v er th e d iap h r agm so t h at th e b ea d o n t h e
d iap h r agm is alig n e d w ith th e g ro o ve o n th e p u m p
ch am b e r. T h e p um p ch a m b e r sh o u ld b e o rie n t ed so th e
“P P ” log o is u p righ t. Th e m a in sp oo l h ou sin g sh ou ld b e
at th e top , ad jac e n t to th e d isch arg e fla n ge s. A ssem b le
th e p u m p c h am b er t o t h e air valve h a lf (u s in g tw e lve
ca p scr ew s, lock w a sh er s an d h e x n u ts .
To rq u e ea c h c ap sc re w , u sin g a “C ross -Se q u en c e ” to
1 5 ft . lbs. (2 0 n-m ).
7 . T u rn th e u n it o ve r so th a t it is re st in g on th e p u m p
ch am b e r p re vio u sly faste n e d . Re p e at ste p #6 fo r th e
o th er sid e o f th e u n it.
N ot e : P la ce a ir va lve an d p u m p c h am b e r asse m b ly,
u p sid e d o w n , o n a c le a n flat su rfa ce . M ake s u re t h e
m a n ifo ld fla n ge s a re p ara lle l to e ach oth er . Th is ca n b e
co n firm e d b y p lac in g t h e su c tion m an ifold o n to p o f th e
ch am b e rs a n d ch e c kin g t h e m atin g su rfac e s.
8 . W ith th e u n it u p sid e d ow n so th at it is re st in g on th e
d isch a rg e fla n ge o f th e p u m p c h am b e r an d th e su ction
fla n ge is fa cin g u p . P la ce a b a ll valve se at , & b a ll va lve
in to ea ch fla n ge cou n te r b o re o f th e su ct ion m a n ifold .
N ot e : Be su re th e ra ise d O -rin g con tou r , on th e b all
valve se at , fac e s inw ar d w h e n in st alle d in t o t h e fla n ge
co u n te r b o r e, o f t h e su c tio n m an ifold a n d p u m p
ch am b e rs.
9 . Fas ten th e su c tion m an ifo ld to e ach p u m p ch a m b e r
4 . P lac e th e h e x h e ad of o n e of th e ou ter p la tes (or
E SN A n u t) in a t ab le vise an d tigh t en th e o p p o sin g o u t er
u sin g eigh t loc k w a sh e rs an d c ap scr ew s. To rq u e e a ch
ca p scr ew to 2 5 ft . lbs . (3 4 n-m ).
d iap h r ag m p la te u sin g a soc ke t o r b o x w r e n ch . To rq u e
th e asse m b ly to 3 5 ft. lbs. (4 7 n-m ). Be c e rt ain b o th
1 0 . T u rn th e u n it r igh t-sid e u p s o t h at it is st an d in g o n
it s fe et . P lac e a b a ll va lve sea t & b all valve in to th e
p u m p c h a m b e r. Ch e ck to m a ke su r e th e su rfa ce o f th e
“O ”-rin g is a b ove th e su rfa ce o f th e p u m p c h am b e r.
o u t er d ia p h ra gm p late s are tor q u e d to 3 5 ft . lbs . (4 7 nm ).
IN-AOD-150M-B rev. A
Page - 7
R E PA I R A N D M A I N T E N A N C E
1 1 . F aste n th e d isc h ar ge m an ifo ld to e ac h p u m p
c h am b e r u sin g e igh t lo ck w ash e r s a n d ca p sc re w s.
T orq u e e ac h c ap sc re w t o 2 5 ft. lb s. (3 4 n-m ). No te th a t
th e su c tio n a n d d isc h a rge m an ifold s c an b e o rie n t ed to
fit th e in stalla tio n r e q u ir e m e n ts.
R E-A SSE M B L Y IN ST R U CTI O N S FO R
A O D -XX XX -B (Bo lte d De sig n) T E FLO N EL A ST O M E R S
1 . G e n tly in se rt th e p u m p sh a ft in to th e sle e ve b e ar in g
of th e a ir va lve h o u sin g, u n til th e last r ad iu se d e d g e of
th e p u m p sh aft ju st p a sse s th r ou gh th e sle e ve b e a rin g
se al. P u sh t h e p u m p sh aft b ac k t h rou g h t h e slee ve
b e ar in g se a l fro m th e o p p o site e n d a n d c e n te r th e
p u m p sh aft in th e air v alv e asse m b ly. Th e p u m p sh aft
sh o u ld m ov e fre e ly w ith ou t b in d in g .
2 . P lac e th e air valve a ssem b ly on a c le an fla t su rfac e .
Slid e a n e w r u b b e r b u m p er o n to sh aft, in n er d iap h ra gm
p late , b ac ku p d iap h r agm “ Flu id Sid e O u t .”, T e flo n
d iap h r ag m , d ia gu a rd , an d o u te r d iap h ra gm p late (or
E SN A N u t w ith d iap h r agm p lat e ) to p u m p sh a ft. A p p ly a
fe w d r op s of B lu e Loc tite # 2 4 2 (or e q u iv alen t) to p u m p
sh a ft t h re ad s . Tigh t e n o u ter c lam p in g p late b u t d o n o t
to rq u e d ow n com p lete ly u n til la te r in th e r e asse m b ly.
4 . T u rn th e u n it o ve r so th a t it is re st in g on th e p u m p
ch am b e r p re vio u sly faste n e d . Re p e at ste p #’s 3 a n d 4
for th e o th e r sid e o f th e u n it.
5 . T u rn u n it u p sid e d o w n so th a t it is re st in g o n th e
d isch a rg e fla n ge o f th e p u m p c h am b e r an d th e su ction
fla n ge is fa cin g u p . In se rt b all valve , “ O ”-r in g , b a ll va lve
se at an d “ O ” -r in g in to e ac h su ction p o r t o f th e p u m p
ch am b e r. C h ec k to m ak e su re th e su rfac e of t h e “O ”rin g is ab ove t he su rfa ce o f th e p u m p ch am b er flan g e.
6 . Fa ste n th e su c tion m a n ifold t o e ac h p u m p c h am b e r
u sin g eigh t loc k w a sh e rs an d c ap scr ew s. T orq u e e ac h
ca p scr ew to 1 5 ft . lbs . (2 0 n-m ).
7 . T u rn th e u n it r ig h t-sid e u p so th at it is stan d in g on its
fee t. P la ce a b all valve , “ O ”-rin g, b all va lve se a t, a n d
“O ”-rin g in to ea ch d isc h ar ge m a n ifo ld fla n ge . Ch e ck to
m a ke su r e th e su rfac e o f th e “ O ” -rin g is ab ove th e
su r fa ce of th e m a n ifold flan g e.
8 . Fa ste n th e d isc h ar ge m an ifo ld to e ac h p u m p ch a m b e r
u sin g eigh t loc k w a sh e rs an d c ap scr ew s.
To rq u e ea c h c ap sc re w to 1 5 ft . lbs . (2 0 n-m ). N ot e th a t
th e su ct ion a n d d isc h ar ge m an ifold s c an b e o r ie n te d to
fit th e in st alla tio n r e q u ir em e n ts.
D ep re ss o n e of t h e d iap h rag m asse m b lies c om p le te ly
in to on e o f th e a ir va lve h alve s. Se t th is sid e flat on to a
c le an fla t su rfac e so th a t th e o t h e r d ia p h ra gm is fa cin g
up.
3 . C ar efu lly align t h e G ort ex tap e alon g th e o u te r b e ad
o f th e d iap h ra gm . N ow align th e ta p ed o u t er b e a d o f
th e d ia p h r agm w ith th e groo ve on th e a ir va lve h alf.
P lac e th e p u m p c h am b e r o ver t h e d iap h r ag m so t h at
th e b e ad o n th e d iap h ra gm is align e d w ith th e gro o ve
o n th e p u m p c h am b e r.
A sse m b le t h e p u m p ch a m b e r to th e a ir va lve h alf u sin g
tw e lve c ap scr ew s lock w a sh er s an d h e x n u t s.
T orq u e e ac h c ap sc re w , u sin g a “ Cro ss-S eq u en ce ” to
1 5 ft . lbs . (2 0 n-m ).
Page - 8
IN-AOD-150M-B rev. A
R E PA I R A N D M A I N T E N A N C E
A O D A IR V A LV E DI SA S SE M B LY IN S TR U C T IO N S
P O LY P R O P Y L E N E, P V D F & A O D -XX XX C LA M P ED &
B O L T ED , A LL EL A ST O M E R S
e ac h e n d o f t h e p ilo t sp o o l. Ex a m in e fo r w e ar a n d
re p lac e a s n e c ess ary .
7 . T h e a ir va lve asse m b ly is n o w co m p lete ly
d isasse m b le d .
R EM O V A L O F A IR C H A M B ER S
1 . R e m o ve th e five h ex n u ts, lo ck w ash e r s, sp e c ia l flat
w a sh e rs an d fla t h ea d so cke t sc re w s w h ic h r e tain o n e o f
th e air ch am b e r s to th e air valve h o u sin g . Re p e a t t h is
ste p fo r th e o p p o site a ir c h am b e r.
2 . L o o se n th e c o n n ec tio n b et w ee n th e lo n g flath e a d
sc re w an d sh o r t flat h e ad scr e w a t co u p lin g n u t b y
tu r n in g b o th an d c o u n te r c lo c kw ise u sin g tw o A lle n
w r en ch e s. L o o se n lo ck-n u t fro m c o u p lin g n u t, an d
re m o ve b o t h fro m lo n g flat h e ad sc re w .
3 . S et as id e gaske ts an d , if u se d , a ir c h a m b e r clam p in g
rin gs . P lastic p u m p s are b o lt ed w h ile m e ta llic p u m p s
c an e ith er u se clam p in g r in g s o r b e b o lte d . R e m o ve
se als fr o m b o th a ir c h am b er s. R e p la ce th e se ite m s
d u r in g r ea sse m b ly.
A I R V A LV E B O DY D ISA SSE M BL Y I N ST R U C T IO N S
1 . R e m o ve sp o o l h o u sin g e n d ca p s, gask ets a n d c ap
sc re w s fr o m sp o o l h o u sin g.
2 . R e m o ve m ain sp o o l a n d ex am in e sp o o l, p isto n r in gs
an d r in g e x p an d e rs fo r w e a r. R e p la ce p ist o n rin g set &
sp o o l if d e ep ly scr atc h e d , c h ip p ed o r w o rn . N ew sp o o ls
w ill b e in te rc h an g ea b le w it h o ld . If m a in sp o o l b o re in
sp o o l h o u sin g h a s b e c o m e c o r ro d e d , ex c es sive ly p itte d ,
o r d e e p ly sc ra tc h ed re p lac e sp o o l h o u sin g.
3 . R e m o ve m u ffle r fro m a ir va lve h o u sin g a n d ch e c k
in sid e fo r d irt an d d e b ris. If m u ffle r is c lo g ge d it w ill
affe ct p u m p p er fo rm an c e . Re p lac e if n e ce ssa ry.
4 . R e m o ve sp o o l h o u sin g a n d gaske t b y re m o v in g th e
fo u r so c ke t h e ad ca p sc re w s an d lo ck w as h e rs. C h e ck
ga ske t fo r a n y d eg ra d at io n an d re p lac e if r eq u ir ed .
5 . In s p ec t ‘O ilL te ’ b ro n ze sle eve b u sh in gs in va lve
h o u sin g . R ep la ce a s n ec e ssar y.
6 . R e m o ve th e p ilo t sp o o l fro m t h e air valve b y p u llin g
o u t a t o n e e n d . Re m o ve t h e p isto n r in g a ssem b lie s fr o m
A I R V A L V E B O DY R EA SSE M B L Y IN ST R U C TI O N S
C A U TI O N : C a re m u st b e t ake n a t th is sta ge o f
re a ssem b ly to e n su r e cle an lin ess . A d ir ty v alve w ill stick
an d w ill n o t w o rk p ro p e rly. K e e p a re a fre e o f d irt , o il,
an d m et al c h ip s.
1 . C le an a ll m e ta l p a rts w it h go o d gr ad e sa fety so lve n t
p rio r to r ea sse m b ly.
2 . P r es s sh a ft b u sh in gs in to a ir va lve h o u sin g, m akin g
su r e th e y are p ro pe r ly align e d w ith th e b o re in th e va lve
h o u s in g . P r ess b u sh in gs in to a h e igh t o f 0 .1 6 5 " a b o ve
th e flu sh p o sitio n .
3 . In st all n e w p isto n r in g a ssem b lie s o n p ilo t sp o o l. P u s h
p ilo t sp o o l w ith p isto n r in gs in to b o r e o f a ir va lve . Ta ke
ca re to p o sitio n sp lits in p ist o n rin gs to 3 o 'clo ck o r 9
o 'clo ck p o s itio n in b o r e.
4 . In sp ec t sp o o l fo r sc ra tc h es, sco rin g, ch ip s, a n d w e ar.
If se ve re g ro o v in g o r m ar kin g is e vid en t, r e p la ce sp o o l.
To e n su r e m ax im u m p e rfo rm an c e th e sp o o l sh o u ld n o t
b e e x ce ssive ly w o rn , a lth o u gh th e p u m p w ill still ru n
sat isfa cto rily.
5 . In se r t p isto n r in g se als an d ex p a n d e r rin gs p r io r to
re a ssem b ly. Re p lac e w ith n e w if r eq u ir ed .
N O TE : U p o n re as sem b ly o f p isto n r in g se als an d
e xp an d e r r in gs th e o p e n in g in th e e x p an d e r rin g an d th e
sp lit in t h e p isto n rin g sh o u ld b e as sem b led 1 8 0 ° a p ar t.
A lso , u p o n r e asse m b lin g t h e sp o o l to th e sp o o l h o u sin g
b o r e , ro tate p ist o n rin g se a ls in th e ir gro o ve s u n t il t h e
sp lit in t h e se al is a t t h e va lve ho u sin g 3 o r 9 o 'c lo c k
p o sitio n . T h is p re ve n ts t h e sp lit fro m c o ve rin g valve
h o u s in g p o rts d u rin g re a ssem b ly. T h is a lso e lim in ate s
th e te n d e n cy to h an g u p o n a p o r t. D o n o t in stall m a in
sp o o l in a ce n t er ed p o sitio n o r p u m p m ay n o t sta rt.
6 . In st all sp o o l h o u sin g ca p g aske ts w ith e x is tin g e n d
ca p s an d 1 /4 " - 2 0 A lle n h ea d scr ew s a t b o th e n d s o f
sp o o l h o u sin g.
IN-AOD-150M-B rev. A
Page - 9
R E PA I R A N D M A I N T E N A N C E
7 . P o sit ion n e w gaske t an d sp o ol h ou s in g a ssem b ly on to
va lve h ou sin g an d se cu r e w ith fo u r A lle n h e a d sc re w s,
an d loc k w a sh e rs. To rq u e scr ew s to 7 ft -lb s. (9 .5 n-m ).
8 . C h e ck m u ffle r to m a ke su r e th a t it is c le an a n d fr ee o f
d e b ris. If it c an n o t b e cle an e d , re p lace w it h n e w . In stall
m u ffle r in air valve h o u s in g. D o n o t o v er -t igh te n . O n e
q u a rte r tu rn p ast h a n d t ig h t sh o u ld b e su ffic ie n t.
A I R CH A M B ER R E A S SE M B LY T O A IR V A L V E B O D Y
1 . In s tall n e w se a ls in b o t h a ir c h am b e rs. Im p o r ta n t! T h e
lip s o f se a l m u st fac e a w ay fr o m th e air va lve h o u s in g
an d t h e lip s o f s ea l m u st fac e in w ar d t ow ar d s th e c e n te r
of th e a ir va lve h o u sin g.
2 . A lign gaske t w ith a ir va lve h o u sin g an d a tta ch air
c h am b e r u sin g five fla th e ad sc re w s, sp ec ia l fla t
w a sh e rs, loc k w ash e rs a n d h e x n u ts.
N O TE : For a n y m od e l w h ich u se s air ch a m b e r c la m p
rin gs m ake c e rta in to p lac e th e clam p r in g s in p o sit io n
b e fore att ach in g a ir c h am b e rs to th e a ir va lve b o d y. Th e
b e ve le d e d ge o f th e c lam p rin g sh o u ld fac e tow a rd s th e
air c h am b e r.
3 . T h r ea d lon g flat h e ad scr ew th r ou gh th e ap p r o p r ia te
h o le in th e o p p osite air ch am b er a n d gaske t, w h ich lin e s
u p w ith th e h o le le ft b lan k in ste p 2 w he n th is air
c h am b e r w as in st alle d . Th r ea d lo ckn u t a n d c ou p lin g n u t
o n t o lon g flath e ad sc re w . L oc k c ou p lin g n u t in p lac e
w ith loc kn u t .
4 . In s tall se con d a ir c h am b e r w it h ga ske t an d lo n g
fla th e ad sc re w w ith lock n u t an d co u p lin g n u t o n t o a ir
va lve . A t tac h a ir c h am b e r to air valve u sin g five flath e ad
sc re w s (9 ), sp ec ia l fla t w ash e rs, lo ck w ash er s a n d h e x
n u t s.
5 . In s tall sh or t, flat h e ad scr e w in b la n k h ole in fir st a ir
c h am b e r, t h e n e n ga ge c ou p lin g n u t. T igh te n fla t h e a d
sc re w s an d u sin g tw o A lle n w r e n ch es. To rq u e all air
c h am b e r to a ir va lve h ar d w ar e to 7 ft -lb s. (9 .5 n-m ).
6 . T h e a ir va lve asse m b ly is n ow co m p let ely re fu rb ish e d
an d r e ad y fo r fu rth e r p u m p a sse m b ly.
Page - 10
IN-AOD-150M-B rev. A
THIS PAGE INTENTIONALLY LEFT BLANK
IN-AOD-150M-B rev. A
Page - 11
1 ½ ” A O D B olted S tain le ss S te el P ar ts L is t
(T eflo n E la sto m e rs)
A O D 1 .5 B SS -T p l is t.d oc
Ke y #
D es criptio n
Q ty
Pa rt #
M a te ria l
1
4
6
7
8
9
12
14
15
16
17
19
20
23
24
28
29
32
35
36
37
39
43
44
45
46
47
48
50
51
61
62
65
66
67
68
78
82
83
85
86
89
91
95
C h a m be r, P um p
P la te, D ia p h ra g m (O ute r)
D ia p h ra gm
P la te, D ia p h ra g m (In n er)
B um p er
C a p S cre w
S ea l
S ea l
G a sk et , Ai r V a l ve / C h a m b er
S h a ft, P u m p
“ D ” F l a t W a sh e r
C a p S cre w , H ex H ea d
L o ck W a sh er
M a n ifol d, D is ch a r ge
M a n ifol d, S uc ti on
S ea t , ba ll Va lve
B a ll, Va lve
H ex N u t
C a p S cre w , S o ck et H e a d
C a p , S p o o l, A ir Va lve
G a sk et , C a p
S po o l, Air V a lv e
S lee ve, B us h in g
M u ffle r
P is to n R in g, A ir V a lv e
R in g , E x p a n d er, Air V a lv e
O -r in g
D ia p h ra gm , B a c ku p
D ia g ua r d
G or te x T a p e
L o ck W a sh er
H ex N u t
G a sk et , Ai r V a l ve / S p o o l
Flat SO C C ap
O -r in g
H o usi n g , S p o o l
H o usi n g , Ai r V a l ve
P il ot S p o ol , Air V a lv e
S po o l R in g, Air V a lv e
C o up li n g N ut , H ex
C h a m be r, A ir
C a p S cre w
C a p S cre w
C a p S cre w , S o ck et H e a d
2
2
2
2
2
10
2
2
2
1
10
32
32
1
1
4
4
16
8
2
2
1
2
1
2
2
8
2
2
2
14
11
1
1
12
1
1
1
2
1
2
2
1
4
4 6- 1 3 0- 1 0
4 4- 9 0 4- 1 0
4 4- 1 5 0- 5 0
4 6- 8 5 2- 0 0
4 4- 1 5 1- 0 0
5 1- 7 5 0- 0 0
4 4- 4 3 1- 0 0
4 4- 4 3 2- 0 0
4 6- 5 6 4- 0 0
4 6- 4 7 8- 0 0
4 7- 3 7 0- 0 0
6 0- 0 2 4- 0 0
6 0- 0 5 5- 0 0
4 6- 1 3 1- 1 0
4 6- 1 3 2- 1 0
4 6- 1 0 2- 0 0
4 4- 1 4 4- 5 0
6 0- 0 6 1- 0 0
5 1- 6 4 0- 0 0
4 5- 7 4 3- 0 0
4 5- 7 2 8- 0 0
4 7- 1 9 6- 0 0
4 4- 1 8 6- 0 0
4 4- 2 8 4- 6 6
4 4- 4 2 7- 0 0
4 4- 5 3 7- 0 0
4 6- 1 0 3- 0 0
4 6- 1 9 7- 0 0
4 6- 1 0 5- 0 0
6 0- 0 0 1- 0 0
6 0- 0 5 3- 0 0
5 1- 7 4 3- 0 0
4 7- 3 4 8- 0 0
5 1- 7 5 1- 0 0
4 7- 3 5 1- 0 0
4 6- 4 9 6- 1 0
4 6- 4 9 5- 1 0
4 7- 3 4 1- 0 0
4 7- 4 6 3- 0 0
4 6- 5 3 3- 0 0
4 7- 3 4 4- 0 4
6 0- 0 3 7- 0 0
6 0- 0 3 6- 0 0
5 1- 7 4 9- 0 0
S ta in less S tee l
S ta in less S tee l
T eflo n
S ta in less S tee l
P o ly ure th a n e
S ta in less S tee l
M o ly th a n e
M o ly th a n e
R u b be r
S tee l - N it rid ed
S ta in less S tee l
S ta in less S tee l
S ta in less S tee l
S ta in less S tee l
S ta in less S tee l
S ta in less S tee l
T eflo n
S ta in less S tee l
S tee l – Z in c P la t ed
N ylo n , G la s s F ille d
P o ly ure th a n e 8 5 +/ - D u ro
P h en o lic
B ro n z e
P o ly pr o py len e
P h en o lic
S ta in less S tee l
T eflo n
B un a
T eflo n
T eflo n
S ta in less S tee l
S ta in less – Z in c P la t ed
F ib er
O x i de C o a ted S te el
B un a
A lu m in u m , A n o d iz ed
C yg la s s
S ta in less S tee l
B un a / P h e n o lic
S tee l – Z in c P la t ed
A lu m in u m
S ta in less S tee l
S ta in less S tee l
S ta in less S tee l
A ir V a lv e R eb ui ld K it
- In cl ud es a ll p a rt s w ith +
E la st o m er K it
1
1
4 7- 6 6 4- 0 0
4 6- 2 0 0- 5 5
+
+
+
+
+
+
+
+
+
+
+
+
Page - 12
IN-AOD-150M-B rev. A
1.5AODB-SStef.dwg
21775 Eighth Street East * Sonoma, CA 95476 * Phone (707) 938-8441 * Fax (707) 938-0764
IN-AOD-150M-B rev. A
Page - 13
1 ½ ” A O D B o lted A lu m in u m P arts L is t
(T ef lo n E la sto m e rs)
A O D 1 .5 B A L- T p li s t.d o c
Key #
D es criptio n
Q ty
Pa rt #
M a te ria l
1
2
4
6
7
8
9
12
14
15
16
17
19
20
21
23
24
28
29
35
36
37
39
43
44
45
46
47
48
50
51
61
62
65
66
67
68
78
82
83
85
86
89
91
95
C h a m be r, P u m p
L o ck N u t
P la te, D ia p h ra g m (O u te r)
D ia p h ra gm
P la te, D ia p h ra g m (In n er)
B u m p er
C a p S cre w
S ea l
S ea l
G a sk et , A i r V a l ve / C h a m b er
S h a f t, P u m p
“ D ” F l a t W a sh e r
C a p S cre w , H ex H ea d
L o ck W a sh er
W a sh er
M a n if ol d, D is ch a r ge
M a n if ol d, S u c ti on
S ea t , ba ll Va lve
B a ll, Va lve
C a p S cre w , S o ck et H e a d
C a p , S p o o l, A ir Va lve
G a sk et , C a p
S po o l, A ir V a lv e
S lee ve, B u s h in g
M u ff le r
P is to n R in g, A ir V a lv e
R in g , E x p a n d er, A ir V a lv e
O -r in g
D ia p h ra gm , B a c ku p
D ia g u a r d
G or te x T a p e
L o ck W a sh er
H ex N u t
G a sk et , A i r V a l ve / S p o o l
Flat SO C C ap
O -r in g
H o u si n g , S p o o l
H o u si n g , A i r V a l ve
P il ot S p o ol , A ir V a lv e
S po o l R in g, A ir V a lv e
C o u p li n g N u t , H ex
C h a m be r, A ir
C a p S cre w
C a p S cre w
C a p S cre w , S o ck et H e a d
2
2
2
2
2
2
10
2
2
2
1
10
32
32
32
1
1
4
4
8
2
2
1
2
1
2
2
8
2
2
2
14
11
1
1
12
1
1
1
2
1
2
2
1
4
4 7- 1 2 2- 5 6
5 1- 6 6 0- 0 0
4 4- 1 4 8- 0 4
4 4- 1 5 0- 5 0
4 6- 8 5 2- 0 0
4 4- 1 5 1- 0 0
5 1- 7 5 0- 0 0
4 4- 4 3 1- 0 0
4 4- 4 3 2- 0 0
4 6- 5 6 4- 0 0
4 6- 4 7 8- 0 0
4 7- 3 7 0- 0 0
6 0- 0 2 4- 0 0
6 0- 0 5 5- 0 0
5 2- 1 2 8- 4 3
4 7- 1 2 0- 5 6
4 7- 1 2 1- 5 6
4 6- 1 0 2- 1 0
4 4- 1 4 4- 5 0
5 1- 6 4 0- 0 0
4 5- 7 4 3- 0 0
4 5- 7 2 8- 0 0
4 7- 1 9 6- 0 0
4 4- 1 8 6- 0 0
4 4- 2 8 4- 6 6
4 4- 4 2 7- 0 0
4 4- 5 3 7- 0 0
4 6- 1 0 3- 0 0
4 6- 1 9 7- 0 0
4 6- 1 0 5- 0 0
6 0- 0 0 1- 0 0
6 0- 0 5 3- 0 0
5 1- 7 4 3- 0 0
4 7- 3 4 8- 0 0
5 1- 7 5 1- 0 0
4 7- 3 5 1- 0 0
4 6- 4 9 6- 1 0
4 6- 4 9 5- 1 0
4 7- 3 4 1- 0 0
4 7- 4 6 3- 0 0
4 6- 5 3 3- 0 0
4 7- 3 4 4- 0 4
6 0- 0 3 7- 0 0
6 0- 0 3 6- 0 0
5 1- 7 4 9- 0 0
A lu m in u m
S tee l – Z in c P la t ed
A lu m in u m
T ef lo n
S ta in less S tee l
P o ly u re th a n e
S ta in less S tee l
M o ly th a n e
M o ly th a n e
R u b be r
S tee l - N it rid ed
S ta in less S tee l
S ta in less S tee l
S ta in less S tee l
S ta in less S tee l
A lu m in u m
A lu m in u m
A lu m in u m
T ef lo n
S tee l – Z in c P la t ed
N ylo n , G la s s F ille d
P o ly u re th a n e 8 5 +/ - D u ro
P h en o lic
B ro n z e
P o ly pr o py len e
P h en o lic
S ta in less S tee l
T ef lo n
B un a
T ef lo n
T ef lo n
S ta in less S tee l
S ta in less – Z in c P la t ed
F ib er
O x i de C o a ted S te el
B un a
A lu m in u m , A n o d iz ed
C yg la s s
S ta in less S tee l
B u n a / P h e n o lic
S tee l – Z in c P la t ed
A lu m in u m
S ta in less S tee l
S ta in less S tee l
S ta in less S tee l
A ir V a lv e R eb u i ld K it
- In cl u d es a ll p a rt s w ith +
E la st o m er K it
1
1
4 7- 6 6 4- 0 0
4 6- 2 0 0- 5 5
+
+
+
+
+
+
+
+
+
+
+
+
Page - 14
IN-AOD-150M-B rev. A
1.5AODB-ALtef.dwg
21775 Eighth Street East * Sonoma, CA 95476 * Phone (707) 938-8441 * Fax (707) 938-0764
IN-AOD-150M-B rev. A
Page - 15
1 ½ ” A O D B o lted S tain le ss S te el P ar ts L is t
(A ll E la s to m e rs E x ce pt T ef lo n )
A O D 1 .5 B SS p lis t .d o c
K ey #
D e sc rip tion
Q ty
P art #
M a teria l
1
4
6
7
8
9
12
14
15
16
17
19
20
23
24
28
29
32
35
36
37
39
43
44
45
46
61
62
65
66
67
68
78
82
83
85
86
89
91
95
C h a m be r, P u m p
P la te, D ia p h ra g m (O u te r)
D ia p h ra gm
P la te, D ia p h ra g m (In n er)
B u m p er
C a p S cre w
S ea l
S ea l
G a sk et , A i r V a l ve / C h a m b er
S h a f t, P u m p
“ D ” F l a t W a sh e r
C a p S cre w , H ex H ea d
L o ck w a sh er
M a n if ol d, D is ch a r ge
M a n if ol d, S u c ti on
S ea t , ba ll Va lve
B a ll, Va lve
H ex N u t
C a p S cre w , S o ck et H e a d
C a p , S p o o l, A ir Va lve
G a sk et , C a p
S po o l, A ir V a lv e
S lee ve, B u s h in g
M u ff le r
P is to n R in g, A ir V a lv e
R in g , E x p a n d er, A ir V a lv e
L o ck W a sh er
H ex N u t
G a sk et , A i r V a l ve / S p o o l
C a rr ia g e B o lt
O -r in g
H o u si n g , S p o o l
H o u si n g , A i r V a l ve
P il ot S p o ol
S po o l R in g A s se m b ly, A ir V a l ve
C o u p li n g N u t , H ex
C h a m be r, A ir
C a p S cre w , S o ck et H e a d
C a p S cre w
C a p S cre w , S o ck et H e a d
2
2
2
2
2
10
2
2
2
1
10
32
32
1
1
4
4
16
8
2
2
1
2
1
2
2
14
11
1
1
12
1
1
1
2
1
2
2
1
4
4 6 -1 3 0 -1 0
4 4 -9 0 4 -1 0
4 4 -1 5 0 -**
4 6 -8 5 2 -0 0
4 4 -1 5 1 -0 0
5 1 -7 5 0 -0 0
4 4 -4 3 1 -0 0
4 4 -4 3 2 -0 0
4 6 -5 6 4 -0 0
4 4 -1 5 2 -0 0
4 7 -3 7 0 -0 0
6 0 -0 2 4 -0 0
6 0 -0 5 5 -0 0
4 6 -1 3 1 -1 0
4 6 -1 3 2 -1 0
4 4 -1 4 5 -**
4 4 -1 4 4 -**
6 0 -0 6 1 -0 0
5 1 -6 4 0 -0 0
4 5 -7 4 3 -0 0
4 5 -7 2 8 -0 0
4 7 -1 9 6 -0 0
4 4 -1 8 6 -0 0
4 4 -2 8 4 -6 6
4 4 -4 2 7 -0 0
4 4 -5 3 7 -0 0
6 0 -0 5 3 -0 0
5 1 -7 4 3 -0 0
4 7 -3 4 8 -0 0
5 1 -7 5 1 -0 0
4 7 -3 5 1 -0 0
4 6 -4 9 6 -1 0
4 6 -4 9 5 -1 0
4 7 -3 4 1 -0 0
4 7 -4 6 3 -0 0
4 6 -5 3 3 -0 0
4 7 -3 4 4 -0 4
6 0 -0 3 7 -0 0
6 0 -0 3 6 -0 0
5 1 -7 4 9 -0 0
S ta i n les s S te el
S ta i n les s S te el
C u s to m e rs Pr ef eren ce
S ta i n les s S te el
P o ly u r eth a n e
S ta i n les s S te el
M o ly th a n e
M o ly th a n e
P o ly u r eth a n e
S tee l - N it rid ed
S ta i n les s S te el
S ta i n les s S te el
S ta i n les s S te el
S ta i n les s S te el
S ta i n les s S te el
C u s to m e r P re fe ren c e
C u s to m e r P re fe ren c e
S ta i n les s S te el
S tee l – Z in c Pl a ted
N yl on , G la ss F ill ed
P o ly u r eth a n e
P h e n o lic
B ro n z e
P o ly p ro py le n e
P h e n o lic
S ta i n les s S te el
S ta i n les s S te el
S ta i n les s – Z in c Pl a te d
F i be r
O xi de C o a te d S t eel
B un a
A lu m in u m , A n o d iz e d
C yg la s s
S ta i n les s S te el
N eo p rin / P h en o lic
S tee l – Z in c Pl a ted
A lu m in u m
S ta i n les s S te el
S ta i n les s S te el
S ta i n les s S te el
A ir V a lv e R eb u i ld K it
- In cl u d es a ll p a rt s w ith +
E la st o m er K it
1
1
4 7 -6 6 4 -0 0
4 4 -8 0 8 -**
+
+
+
+
+
+
+
+
+
+
+
+
** E la st o m ers :
Page - 16
00
10
20
30
60
–
–
–
–
–
N e o pr en e
Bu na-N
V ito n
N o r de l
S a n to p ren e
IN-AOD-150M-B rev. A
1.5AODB-SS.dwg
21775 Eighth Street East * Sonoma, CA 95476 * Phone (707) 938-8441 * Fax (707) 938-0764
IN-AOD-150M-B rev. A
Page - 17
1 ½ ” A O D B o lted A lu m in u m P arts L is t
(A ll E la s to m e rs E x ce pt T ef lo n )
A O D 1 .5B A Lp l is t.d oc
K ey #
D e sc rip tion
Q ty
P art #
M a teria l
1
2
4
6
7
8
9
12
14
15
16
17
19
20
21
23
24
28
29
35
36
37
39
43
44
45
46
61
62
65
66
67
68
78
82
83
85
86
89
91
95
C h a m be r, P u m p
L o ck N u t
P la te, D ia p h ra g m (O u te r)
D ia p h ra gm
P la te, D ia p h ra g m (In n er)
B u m p er
C a p S cre w
S ea l
S ea l
G a sk et , A i r V a l ve / C h a m b er
S h a f t, P u m p
“ D ” F l a t W a sh e r
C a p S cre w , H ex H ea d
L o ck w a sh er
W a sh er
M a n if ol d, D is ch a r ge
M a n if ol d, S u c ti on
S ea t , ba ll Va lve
B a ll, Va lve
C a p S cre w , S o ck et H e a d
C a p , S p o o l, A ir Va lve
G a sk et , C a p
S po o l, A ir V a lv e
S lee ve, B u s h in g
M u ff le r
P is to n R in g, A ir V a lv e
R in g , E x p a n d er, A ir V a lv e
L o ck W a sh er
H ex N u t
G a sk et , A i r V a l ve / S p o o l
C a rr ia g e B o lt
O -r in g
H o u si n g , S p o o l
H o u si n g , A i r V a l ve
P il ot S p o ol
S po o l R in g A s se m b ly, A ir V a l ve
C o u p li n g N u t , H ex
C h a m be r, A ir
C a p S cre w , S o ck et H e a d
C a p S cre w
C a p S cre w , S o ck et H e a d
2
2
2
2
2
2
10
2
2
2
1
10
32
32
32
1
1
4
4
8
2
2
1
2
1
2
2
14
11
1
1
12
1
1
1
2
1
2
2
1
4
4 7 -1 2 2 -5 6
5 1 -6 6 0 -0 0
4 4 -1 4 8 -0 4
4 4 -1 5 0 -**
4 6 -8 5 2 -0 0
4 4 -1 5 1 -0 0
5 1 -7 5 0 -0 0
4 4 -4 3 1 -0 0
4 4 -4 3 2 -0 0
4 6 -5 6 4 -0 0
4 4 -1 5 2 -0 0
4 7 -3 7 0 -0 0
6 0 -0 2 4 -0 0
6 0 -0 5 5 -0 0
5 2 -1 2 8 -4 3
4 7 -1 2 0 -5 6
4 7 -1 2 1 -5 6
4 4 -1 4 5 -**
4 4 -1 4 4 -**
5 1 -6 4 0 -0 0
4 5 -7 4 3 -0 0
4 5 -7 2 8 -0 0
4 7 -1 9 6 -0 0
4 4 -1 8 6 -0 0
4 4 -2 8 4 -6 6
4 4 -4 2 7 -0 0
4 4 -5 3 7 -0 0
6 0 -0 5 3 -0 0
5 1 -7 4 3 -0 0
4 7 -3 4 8 -0 0
5 1 -7 5 1 -0 0
4 7 -3 5 1 -0 0
4 6 -4 9 6 -1 0
4 6 -4 9 5 -1 0
4 7 -3 4 1 -0 0
4 7 -4 6 3 -0 0
4 6 -5 3 3 -0 0
4 7 -3 4 4 -0 4
6 0 -0 3 7 -0 0
6 0 -0 3 6 -0 0
5 1 -7 4 9 -0 0
A lu m in u m
S tee l – Z in c Pl a ted
A lu m in u m
C u s to m e rs Pr ef eren ce
S ta i n les s S te el
P o ly u r eth a n e
S ta i n les s S te el
M o ly th a n e
M o ly th a n e
P o ly u r eth a n e
S tee l - N it rid ed
S ta i n les s S te el
S ta i n les s S te el
S ta i n les s S te el
S ta i n les s S te el
A lu m in u m
A lu m in u m
C u s to m e r P re fe ren c e
C u s to m e r P re fe ren c e
S tee l – Z in c Pl a ted
N yl on , G la ss F ill ed
P o ly u r eth a n e
P h e n o lic
B ro n z e
P o ly p ro py le n e
P h e n o lic
S ta i n les s S te el
S ta i n les s S te el
S ta i n les s – Z in c Pl a te d
F i be r
O xi de C o a te d S t eel
B un a
A lu m in u m , A n o d iz e d
C yg la s s
S ta i n les s S te el
N eo p rin / P h en o lic
S tee l – Z in c Pl a ted
A lu m in u m
S ta i n les s S te el
S ta i n les s S te el
S ta i n les s S te el
A ir V a lv e R eb u i ld K it
- In cl u d es a ll p a rt s w ith +
E la st o m er K it
1
1
4 7 -6 6 4 -0 0
4 4 -8 0 8 -**
+
+
+
+
+
+
+
+
+
+
+
+
** E la st o m ers :
Page - 18
00
10
20
30
60
–
–
–
–
–
N e o pr en e
Bu na-N
V ito n
N o r de l
S a n to p ren e
IN-AOD-150M-B rev. A
1.5AODB-AL.dwg
21775 Eighth Street East * Sonoma, CA 95476 * Phone (707) 938-8441 * Fax (707) 938-0764
IN-AOD-150M-B rev. A
Page - 19
PR IC E A O D ® P U M P C A U T IO N S & W A R N IN G S
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
C A U T IO N : A S tatic char ge b u ild u p co u ld o ccu r in a p lastic p u m p or an electr ically in su lated m etal p u m p .
W A R N N IN G : A n y co n tam in an ts in the air su p p ly w ill be ex h austed o u t th e m u ffler to the atm o sp h ere.
It is r ecom m en d ed th at all p ip in g con n ectio n s to th e pu m p sh ou ld b e flex ib le.
W A R N N IN G : V erif y ch em ical co m p atib ility o f th e pu m p m aterials o f con str uctio n w ith th e flu id b ein g p u m p ed b efo re
u se.
P rice A O D ® p u m ps ar e n o t d esig n ed fo r u se in san itary or fo od ap plication s.
S ub m erg ed P rice A O D ® p um p s sh o uld hav e th eir ex hau st p iped aw ay f ro m th e liq u id level. A sub m erg ed pu m p m ay
leak so me air fro m gask eted jo in ts. D o n o t su b m erge p u m p s in corr o siv e f lu id s or m ed ia.
A p u mp w h ich h as sto p ped d u e to air valve ‘icin g’ w ill r estart b y itself w h en the ice is rem o v ed o r m elts.
U se o n ly Price P u m p o rigin al equ ipm en t factor y rep lacem en t p arts.
C A U T IO N : B efo re start-u p , re-to rq u e all ex tern al fasten ers to the v alu es listed in th is I& O m an u al su p p lied w ith th e
p um p .
P um p fluid temp eratur e lim its m u st b e o b serv ed :
o N o n-M etallic pu m p s - 18 0 - 2 12 d eg. F m ax. (8 2 - 1 0 0 d eg . C ) d epen d in g on p um p m ater ial o r elasto m ers.
o M etallic p u m p s - 18 0 - 2 48 d eg . F m ax . ( 82 - 1 20 d eg . C ) d ep en d in g on elastom ers.
C A U T IO N : D o n o t ex ceed 1 2 5 p si ( 8.8 B ar) air in let p ressu re as co m p o nen t d am ag e or p erso n al in jury m ay r esu lt.
P rice A O D ® p u m ps m u st o n ly b e op erated b y clean, o il fr ee, d ry com p ress ed air.
S hu t o ff , b leed d ow n an d dis co n n ect th e com p ressed air su p ply b efo re d o in g an y main ten ance o r rep air to th e p um p .
T he p u mp sh o u ld be flu sh ed b ef or e d isassem b ly . T he p u mp sh o u ld b e inv erted (o u tlet at bo tto m) to dr ain p ro p erly.
W A R N N IN G : A d iap hr agm failu re cou ld :
o C au se th e system to w h ich th e p u m p is co nn ected to be p ressu rized u p th e co m p ressed air su pp ly lin e an d m ix
air w ith th e f lu id being p u mp ed .
o C au se th e f lu id bein g p u m ped to b e spr ayed o ut th ro ug h th e exh au st m u ffler.
C A U T IO N : A lu m in u m P rice A O D ® p um p s are n o t suitab le fo r u se w ith 1 , 1 , 1 -tr ich lo ro eth ane, m eth y len e ch lorid e o r
o th er m aterials con taining h alo g enated h y dr ocarb o n s. A lu m in u m w etted p arts can r eact w ith these so lv en ts and ex plo de.
C o n su lt so lv en t su p pliers fo r co m patib ility w ith alu m inu m p u m ps b efo re in stallation .
C A U T IO N : F o r 1 -1/2 ”, 2 ” an d 3 ” Pr ice A O D ® p u mp s, u n it w eigh t m ay exceed 6 5 1 b s. (3 0 k g ).
P rice A O D ® pu m p so u nd lev els at a d istan ce o f 3 ft. (1 m eter) w ith an air inlet p ressur e of 3 5 ps ig .
P um p S ize (in In ches)
1 /2 ”
1”
1”
1 -1 /2”
2”
2”
3”
Page - 20
P u m p M aterial
N on -M etallic
N on -M etallic
M etallic
M etallic
N on -M etallic
M etallic
M etallic
S ou n d Pres sure L evel (R M S d b )
82 db
82 db
82 db
82 db
79 db
80 db
80 db
IN-AOD-150M-B rev. A
W ar n in g a n d S a fety in stru ction s - A T E X
Please ob serv e a ll W a rn ing an d S afety no tes
T his sy m bo l m arks n otes w hich con tain safet y relev an t in form ation . If th is in fo rm ation is
d isreg arded o r the pu m p is o perated no t in accordance w ith the ap prop riate in structio ns, p oten tially
d an gero us situ ations m ay result which m ay cause harm to h um ans, p ro du ctio n p lants an d m achines.
T his sy m bo l m arks n otes and instru ction s relevant to installin g and op erating
exp losio n hazard ou s areas.
ε
x
ap prov ed pu m ps in
Pu m ps fo r u se in hazardo us a reas
P um p s fo r use in ex plo sion h azardo us areas are m ark ed according ly sho wing the ap prov ed zon e an d
g ro up . If th e pu m p is m ark ed as sh own below it can b e u sed in h azardo us areas, Zon e 1 accordin g to
the current A TEX regu lation s. Th e special con dition s for th is o peratio n m ust be strictly ad h ered to as
o utlin ed in th e A TEX m anu al.
II 2 G c II T 4
L U 0 3 A TEX M 00 3X
T he pu m p m ust be con nected to earth. Th e w ire used for this m ust h ave a cro ss sectio n o f no t less
than 4 m m 2 .
T he wire used to earth the pu m p m u st b e con nected to th e Air V alve of th e pum p (as sho wn in the
d rawing below), and then to the earth . P rio r to an y in stallatio n w ork o n th e pum p th e earthing wire
h as to b e co nn ected. If th e p um p is bein g rem ov ed the earth ing wire m u st be rem ov ed last.
An y m aintenance w ork o n the pu m p sh ou ld o nly b e carried ou t b y trained m aintenan ce p erso nn el.
If th e pu m p is m o dified in an y way, witho ut th e app ro val of the m anu factu rer, the pu m p m ay n ot be
installed or u sed in hazardo us areas.
IN-AOD-150M-B rev. A
Page - 21
Page - 22
IN-AOD-150M-B rev. A
GENERAL TERMS OF SALE
1. GENERAL
A. Seller's price is based on these sales terms and conditions. The agreement and inclusion of other
or amended terms in this contract will result in a change (including increase) in Seller's price (as may
be contained in any price books or quotations) to reflect such other or amended terms. This contract
shall represent the final, complete and exclusive statement of the agreement between the parties
and may not be modified, supplemented, explained or waived by parole evidence, any Terms and
Conditions contained in Buyer's purchase order or request for quotation, any course of dealings
between the parties, Seller's performance or delivery, or in any other way. The Terms and
Conditions of this contract may only be modified or waived in a written document signed by an
Officer of Seller. These terms are intended to cover all activity of Seller and Buyer hereunder,
including sales and use of products, parts and work and all related matters (references to products
include parts and references to work include construction, installation and start-up). Any reference
by Seller to Buyer's specifications and similar requirements are only to describe the products and
work covered hereby and no warranties or other terms therein shall have any force of effect. Any
information provided by Seller including, but not limited to, suggestions as to specific equipment
does not imply any guarantee of specific suitability and/or material compatibility in a particular
application, since many factors outside the control of Seller may affect the suitability of products in a
particular application. Catalogs, circulars, similar pamphlets and information contained on websites
of the Seller are issued for general information purposes only and shall not be deemed to modify the
provisions hereof.
B. The agreement formed hereby and the language herein shall be construed and enforced
under the Uniform Commercial Code as in effect in the State of California on the date hereof.
2. TAXES
Any sales, use or other similar type taxes imposed on this sale or on this transaction and/or any
import or export duties or fees as may be assessed or imposed on or as a result of deliveries under
this transaction are not included in the price. Such taxes shall be billed separately to the Buyer.
Seller will accept a valid exemption certificate from the Buyer if applicable; however, if an exemption
certificate previously accepted is not recognized by the governmental taxing authority involved and
the Seller is required to pay the tax covered by such exemption certificate. Buyer agrees to promptly
reimburse Seller for the taxes paid.
3. PERFORMANCE, INSPECTION AND ACCEPTANCE
A. Unless Seller specifically assumes installation, construction or start-up responsibility, all products
shall be finally inspected and accepted within thirty (30) days after arrival at point of delivery. Where
seller has responsibility for installation, construction or start-up all work shall be finally inspected and
accepted with thirty (30) days after completion of the applicable work by Seller. All claims
whatsoever by Buyer, (including claims for shortages) except only those provided for under the
WARRANTY AND LIMITATION OF LIABILITY and PATENTS Clauses, hereof, must be asserted in
writing by Buyer within said thirty (30) day period or they are waived. If this contract involves partial
performance, all such claims must be asserted within said thirty- (30) day period for each partial
performance. There shall be no revocation of acceptance. Rejection may be only for defects
substantially impairing the value of products or work and Buyer's remedy for lesser defects shall be
those provided for under the WARRANTY AND LIMITATION OF LIABILITY Clause.
B. Seller shall not be responsible for non-performance or for delays in performance occasioned by
any causes beyond Seller's reasonable control, including, by way of example and not limitation, to
labor difficulties, delays of vendors or carriers, fires, governmental actions, or shortages of material,
components, labor, or manufacturing facilities. Any delays so occasioned shall affect a
corresponding extension of Seller's performance dates, which are, in any event, understood to be
approximate. IN NO EVENT SHALL BUYER BE ENTITLED TO INCIDENTAL OR
CONSEQUENTIAL DAMAGES FOR LATE PERFORMANCE OR FOR A FAILURE TO PERFORM.
Seller reserves the right to make partial shipments and to ship products, parts or work which may be
completed prior to the scheduled performance date.
C. In the event that Seller has agreed to mount motors, turbines, gears, or other products which are
not manufactured by Seller and which are not an integral part of Seller's manufactured product, and
a delay in the delivery of such products to Seller occurs that will cause a delay in Seller's
performance date, Seller reserves the right to ship its product upon completion of manufacture and
to refund an equitable portion of the amount originally included in the purchase price for mounting
without incurring liability for non-performance.
D. Seller reserves to itself the right to change its specifications, drawings and standards if such
changes will not impair the performance of its products, and parts, and further those products, and
parts, will meet any of Buyer's specifications and other specific product requirements which are a
part of this agreement. Seller is a global supplier of products and utilizes parts and products
obtained worldwide, and Seller's products supplied under this contract shall be subject to Seller's
sole determination as to all manufacturing, sourcing, assembly and supply unless otherwise
specifically agreed in writing.
E. The manufacture and inspection of products and parts shall be to Seller's Engineering and
Quality Assurance standards, plus such other inspections or tests of documentation as are
specifically agreed to by Seller. Requirements for any additional inspection, tests, documentation, or
Buyer witness of manufacture, test, and/or inspection shall be subject to additional charges.
4. TITLE AND RISK OF LOSS
Title and risk of loss shall pass to buyer upon delivery of products at the designated "Ex Works" as
defined by Incoterms, unless other wise agreed by the parties.
5. EROSION AND CORROSION
It is specifically understood that products and parts sold hereunder are not warranted for
operation with erosive or corrosive fluids or for operation with any fluid or under any operating
condition in variance with the specifications of this contract. No product or part shall be deemed
to be defective by reason of failure to resist erosive or corrosive action of any fluid and Buyer
shall have no claim whatsoever against Seller therefore. No product shall be deemed defective
by reason of any effect on Seller's products of the action or results (such as vibration) of any
goods or system (such as piping) not supplied by Seller.
Effective June 2007
6. BUYER’S RESPONSIBILITY
The design specifications of the equipment require the operation of the equipment within certain
parameters and may call for the use of speed controls, safety devices, set points or other control
devices to insure that the operation remains within design parameters. Buyer agrees and understands
that the equipment must be operated and maintained within design specifications and operated within
the specifications of the contract, irrespective of whether controls or devices are otherwise required.
7. WARRANTY AND LIMITATION OF LIABILITY.
A. Seller warrants only that its product and parts, when shipped, will be free from defects in materials
and workmanship. All claims for defective products or parts under this warranty must be made in writing
immediately upon discovery and, in any event, within two (2) years of shipment by seller and all claims
for defective work must be made in writing immediately upon discovery. Defective items must be held
for Seller's inspection and returned to the sellers’ point of original shipment upon request.
ANY UNAUTHORIZED DISSASSEMBLY, ALTERATION OF OR TAMPERING WITH ANY PRODUCT
OR COMPONENT MAY "VOID" THE WARRANTY, IN THAT SUCH ACTION WILL RESULT IN
SELLER BEING RELEASED AND RELIEVED FROM ITS OBLIGATIONS UNDER THIS WARRANTY
AND FOR ANY FURTHER COSTS OR ACTIONS UNDER CLAUSE 7.C, FOLLOWING, AND THE
BUYER ASSUMING SOLE RESPONSIBILITY FOR THE COSTS AND RESULTS OF SUCH ACTION.
THE FOREGOING IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES WHATSOEVER,
EXPRESS, IMPLIED AND STATUTORY, INCLUDING WITHOUT LIMITATION, THE IMPLIED,
WARRANTIES OF MERCHANTABILITY AND FITNESS.
B. ANY PRODUCT (S) SOLD HEREUNDER WHICH ARE NOT MANUFACTURED BY SELLER ARE
NOT WARRANTED BY SELLER and shall be covered only by the express warranty, if any, of the
manufacturer thereof. With respect to products and parts not manufactured by Seller, Seller's only
obligation shall be to assign to Buyer, to the extent possible, whatever warranty Seller obtains from the
manufacturer.
C. Upon Buyer's submission of a claim as provided above and its substantiation, Seller shall at its
option either (i) repair or replace its product, part or work at the original place of shipment, or (ii) refund
an equitable portion of the purchase price.
D. THE FOREGOING IS SELLER'S ONLY OBLIGATION AND BUYER'S EXCLUSIVE REMEDY FOR
BREACH OF WARRANTY AND, EXCEPT FOR THE REMEDIES PERMITTED UNDER THE
PERFORMANCE, INSPECTION AND ACCEPTANCE AND THE PATENTS CLAUSES HEREOF, THE
FOREGOING IS BUYER EXCLUSIVE REMEDY AGAINST SELLER FOR ALL CLAIMS ARISING
HEREUNDER OR RELATING HERETO WHETHER SUCH CLAIMS ARE BASED ON BREACH OF
CONTRACT, TORT (INCLUDING NEGLIGENCE OR STRICT LIABILITY), INDEMNITY OR OTHER
THEORIES. BUYER'S FAILURE TO SUBMIT A CLAIM AS PROVIDED ABOVE SHALL
SPECIFICALLY WAIVE ALL CLAIMS FOR DAMAGES OR OTHER RELIEF, INCLUDING BUT NOT
LIMITED TO CLAIMS BASED ON LATENT DEFECTS. IN NO EVENT SHALL BUYER BE ENTITLED
TO INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES, NOR FOR DAMAGES
FOR LOSS OF USE, LOST PROFITS OR REVENUE, INTEREST, LOST GOODWILL, WORK OR
PRODUCTION STOPPAGE, IMPAIRMENT OF OTHER GOODS, INCREASED EXPENSES OF
OPERATION, OR THE COST OF PURCHASING REPLACEMENT POWER OR OTHER SERVICES
BECAUSE OF SERVICE INTERRUPTIONS. FURTHERMORE, IN NO EVENT SHALL SELLER'S
TOTAL LIABILITY FOR DAMAGES OF BUYER EXCEED THE PURCHASE PRICE OF THE
PRODUCTS OR PARTS MANUFACTURED BY SELLER AND UPON WHICH SUCH LIABILITY IS
BASED. ANY ACTION ARISING HEREUNDER RELATED HERETO, WHETHER BASED ON
BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE) OR OTHER THEORIES, MUST BE
COMMENCED WITHIN ONE (1) YEAR AFTER THE CAUSE OF ACTION ACCRUES OR IT SHALL BE
BARRED.
8. PURCHASER’S REPRESENTATIONS & WARRANTIES
Purchaser represents and warranties that the products(s) covered by this contract shall not be used in or
in connection with a nuclear facility or application. The parties agree that this representation and
warranty is material and is being relied on by seller. This provision may be modified in a separate writing
signed by an officer of Price Pump Co.
9. PATENTS
Seller agrees to assume the defense of any suit for infringement of any patents brought against Buyer to
the extent of such suit charges infringement of an apparatus or product claim by Seller's product in and
of itself, provided (i) said product is built entirely to Seller's design, (ii) Buyer notifies Seller in writing of
the filing of such suit within ten (10) days after the service of process thereof, and (iii) Seller is given
complete control of the defense of such suit, including the right to defend, settle and make changes in
the product for the purpose of avoiding infringement of any process or method claims. Provided
however, Seller will not defend any suit for infringement of a claimed patent where such alleged
infringement is the result of following specific instruction furnished by Seller.
10. EXTENT OF SUPPLY
Only products as listed in Seller's proposal are included in this agreement. It must not be assumed that
Seller has included anything beyond same.
11. MANUFACTURING SOURCES
To maintain delivery schedules, Seller reserves the right to have all or any part of the Buyer's order
manufactured at any of Sellers’, sellers’ licensees or sub contractors’ plants, globally.
12. TERMS OF PAYMENT
Net 30 days from date of invoice.
13. ARBITRATION
In the event a dispute arises between the parties relating to or arising out of this agreement, the parties
agree to attempt to have their senior management amicably settle the matter. In the event that the
matter cannot be settled, the parties shall submit all disputes relating to this Agreement (whether
contract, tort, products liability or otherwise) to binding Arbitration before a panel of arbitrators under the
Commercial Dispute Resolution Procedures of the American Arbitration Association. Each party shall
appoint an arbitrator and the third shall be selected in accordance with the rules of the American
Arbitration Association. Judgment upon the award may be entered in any court having jurisdiction. The
parties shall cooperate in providing reasonable disclosure of relevant documents. Each party shall bear
its own expenses, and the costs and fees of the arbitration shall be borne as allocated by the Arbitrator.
Price® Pump Company, 21775 Eighth St. East, Sonoma, CA 95476 USA