Transcript
Installation Manual EasyFlexx open 1 2 open 3 4 5 6 open blocked Ledger Ledger Ledger 1. Install screw hook. 2. Open three snap profiles, start with the one on top. The snap profiles do only open if pressure points are pressed. Points are marked on protective foil of transparent cover. One short side cannot be opened due to a lock profile. 3. Get out the transparent cover. 4. Insert lettering. 5. Insert transparent cover with non-reflective side (with V-grovove) in front and close snap profiles. 6. Hang the sign onto the hooks. * Installation material for wall mounting (screw hooks and dowels) not included. Optionally the sign can be mounted thief-proof by using a screw.
