Download INSTALLATION MANUAL FOR USING YOUR THROTTLE

Prosim 737 In
nstallation Manual - version 2014-12-17
Installation manual for using your TQ with ProSim
m737®
Thank you for purchasing the mo
otorized version of our new COCKPITFORYOU 737
73 throttle quadrant. It has
been assembled and tested with the greatest care. To make the installation as convenient
c
as possible for
you, we tried to describe the installati
stallation process in great detail. Should you still experience
e
difficulties with
the setup or operation of your throttle
thro
quadrant, please do not hesitate to conttact us via email or phone.
In the near future we will release
lease a video setup tutorial in addition to this manual that
t
will guide you through
all the necessary steps.
We hope you will have as much
ch fun
f flying your new TQ as we had engineering an
nd assembling it.
1. Before getting started
rted
The motor functions of your thro
ottle are realized in connection with an Opencockpi
ckpits DC Motor Interface
card. In order to have it commun
unicate with Prosim and Flight Simulator you need
ed to
•
download and install a copyy of SIOC by Opencockpits, if you haven’t already..
It is available for download here:
ere:
http://www.opencockpits.com/iindex.php/en/download/category/sioc
SIOC ver 5.0B5 is the latest versio
on upon release of this manual and was confirmeed working with our
throttle quadrant.
During the setup of your
y
TQ, the use of Microsoft’s standard B737 is recommended.
r
Please make sure that no other programs are running while install
stalling SIOC.
2