Download User Manual - LTT

Set the desired Master-mode for the master-device. Set the respective Slave-mode for all slave-devices.
Remote Control socket
If you wish to lock the light output - via an optional FUTURELIGHT Easy-5 remote control, connect your
Easy-5 remote control to the remote control socket.
The remote control Easy-5 can be used for switching the gobos and the Auto/Manual mode. In Auto Mode,
the gobos are switched sound-controlled. In Manual Mode, the gobos are switched via remote control.
DMX-512 connection / connection between fixtures
The wires must not come into contact with each other, otherwise
the fixtures will not work at all, or will not work properly.
Please note, the starting address depends upon which controller is being used.
Only use a DMX-cable and 3-pin XLR-plugs and connectors in order to connect the controller with the fixture
or one fixture with another.
23/30
00041967.DOC, Version 1.1