Transcript
06/14-W2010-Wei User manual 738 075 Luggage lamp 1 1 4 5 2 3 4 5 6 7 Sockets for the door switch signal to be looped through Ground connection for the control lamp Ground connection for the trunk switch Luggage compartment lamp Tailgate ajar warning light Tailgate switch 2 3 6 1 Description The device „Luggage lamp“ is used to show the function of a ground-switched LED style luggage compartment lamp with accompanying control lamp to show an open trunk. The warning light comes on when the rear hatch is not closed securely. Safety notes 2 • 3 Scope of delivery Experiment panel Luggage lamp Technical data • Operating voltage: VB = +12-15 V= • Lamp type: LED white • Control lamps: 1 (red) • Switching positions: 2 (0,I) • Switch type: NC - The device is suitable for use only in dry rooms! - The unit must not be put into operation if it has any visible damage. - Use safety bridging plugs and undamaged safety experiment cables only! - The device may only be used for training purposes. Installation in a real vehicle is not permitted! - Make sure that when repairs are required only original spare parts are used! LD DIDACTIC GMBH . Leyboldstrasse 1 . D-50354 Hürth . Phone (02233) 604-0 . Fax (02233) 604-222 . e-mail: [email protected] by LD Didactic GmbH Printed in the Federal Republic of Germany Technical alterations reserved