Download USER MANUAL - CAMBOARD Electronics

im Vertrieb von
CAMBOARD Electronics
VOLUME-PARAMETER = output volume parameters:
[VALUE] either positive or negative digits (minus sign precedes negative values).
“+”
increase current value,
“-“
decrease current value
Window
WIN-CUST WINDOW, HPOS,
WIN- CUST WINDOW, HPOS,
customization
HW , VPOS, VH
HW , VPOS, VH RESULT
Parameters Description: fast window customization
[WINDOW] “0” for main window; “1” for PiP window
[HPOS] horizontal position value
[HW] horizontal width value
[VPOS] vertical position value
[VH] vertical height value
Set dual window state
PIP PIP-MODE
PIP PIP-MODE RESULT
Get dual window state
PIP?
PIP PIP-MODE
Parameters Description:
PIP-MODE = Dual window state:
"0" or "off" for single window.
"1" or "on" to for dual window.
Identification commands
Command
Syntax
Response
Protocol
Handshaking
#CR
Read device model
MODEL?
MODEL MACHINE_MODEL
Read device serial
number
SN?
SN SERIAL_NUMBER
Read device
firmware version
VERSION?
VERSION MAJOR .MINOR
.BUILD .REVISION
Read device build
date
BUILD-DATE?
BUILD-DATE YYYY/MM/DD
HH:MM:SS
~OK CRLF
Read device protocol PROT-VER?
version
PROT-VER 3000:MAJOR
.MINOR
Set machine name
NAME MACHINE_NAME
NAME MACHINE_NAME
RESULT
Read machine name
NAME?
NAME MACHINE_NAME
Reset machine name NAME-RST
to factory default*
NAME-RST RESULT
Network settings commands
Network settings commands require admin authorization
Command
Set IP Address
Syntax
NET-IP IP_ADDRESS
NTIP
VP-771 - The VP-771 RS-232 Communication Protocol
www.camboard.de
Response
NET-IP IP_ADDRESS RESULT
77
Tel. 07131 [email protected]
Fax 07131 911203