Download Etherlink User's Manual

Chapter 1 General
1 General
1.1
Introduction
The Etherlink to transputer OS-Link converter is a highly developed adapter that enables
interfacing a transputer OS-link via Ethernet as it is found on nearly all computing machines
nowadays. The Etherlink firmware operates based on an ARM processor node.
The Etherlink offers many sophisticated features:
•
•
•
•
•
•
•
•
•
1.2
provides communication between a host computer with a standard ethernet port and a
transputer
supports 10/100BaseT Ethernet
uses the TCP/IP protocol over the ethernet connection
data transfer rates up to 1 MB/s for large data packets
link speed is software switchable between 10 Mbps and 20 Mbps
allows software switchable power supply of external devices via OS-Link, thus avoiding
the need for an extra power supply for small peripherals
basic software package for easy integration into customers' applications (Microsoft
Windows)
adapted Inmos iserver for Windows
no additional software on transputer needed
System Requirements
The host operating system is recommended to be Microsoft Windows 2000, but it should work on
other Windows platforms as well. Your host PC has to be connected via 10/100BaseT Ethernet to
the Etherlink device. You have to provide one IP address per Etherlink device. Before using this
product, please carefully check that your package includes:
• EtherLink OS link device
• software package "Eth2Link DLL for Windows NT 4.0/2000"
Doc.-No. 2004-0003, version 1.6
5 / 28