Download User's Manual

NVR8/16 User’s Manual 143
5. Enter the username and password of the FTP server if it’s required
6. Check “Use Passive Mode” if it’s required or leave it unchecked to
use active mode
7. Click “Test” to verify if all information is entered correctly and the
connection to the FTP server can be established successfully
8. Click “Apply” for the settings to take effect
SMTP Servers
1. Enter the hostname or the IP address of the SMTP server 2. Enter
the port of the SMTP server
3. Specify the sender’s name in the “Sender’s name” field 4. Enter the
sender’s e-mail address
5. Check “Enable Authentication” and enter the username and
password of the SMTP server if it requires authentication
6. Click “Apply” to save the configuration
*The NVR supports SMTP servers that use base64 or MD5
authentication methods.