Download USER MANUAL
Transcript
Alarm Timer The machine is fitted with an integral Timer module which can switch the K8 on with a user-selectable source at a programmable time (alarm clock). Selecting an alarm timer in the alarm timer menu switches on and activates the timer. The active alarm timer is indicated on the screen by the Timer LED, which glows constantly. You can now switch the K8 off. As long as the Timer LED is lit, the K8 will switch itself on at the pre-set time. Alarm - with automatic power-off When the Timer is active, the K8 switches on at the programmed alarm time. When switched on, the Timer LED flashes. One hour after the alarm time the K2 switches itself off again automatically, unless you disabled the alarm function during that period. If you disable the alarm function with a long press on the button, the Timer LED ceases flashing. Now the Timer does not switch off automatically after an hour. If you wish to switch the machine off, you must do so manually. Switching the Timer off The alarm timer menu can be called up with a brief press on the button; you can disable the alarm timer in that menu. The alarm timer menu can also be called up with a brief press on the button when the machine is switched off; you can then carry out changes without having to switch on beforehand. Alarm timer menu Calling up and operating the menu • The menu is called up with a brief press on the button on the front panel. • When you open the menu, you will hear the currently selected alarm source at the volume which you have set for the alarm function. The screen displays the following select points: • Use the / buttons to select a point in the menu. • If you wish to alter a selected menu point, first press the button, then use the / buttons to change it. • To adopt the new setting, press the button again after entering the change. • To quit without accepting a change, you can interrupt the procedure at any time by pressing the button. • To leave the menu, press the button on the front panel once more. 21