Download AIDA Microarray for Windows User's Manual

Transcript
3
raytest
values (Bkg Normalized) are calculated. The mean and the standard deviation
of the normalized background values for the spots are calculated. If the
measurement value is background corrected, the threshold is defined by the
selected multiple of the standard deviation. If the measurement value is not
background corrected, the threshold value is defined by adding the mean of the
normalized background values to the selected multiple of the standard
deviation.
• Bkg Multiples defines a threshold, which requires, that Normalized values must
be above a selected multiple of the normalized background
(Normalized > n·Bkg Normalized) to be regarded as detected. This method is
useful, if the standard deviation of the background signals can be determined
only badly or not at all, and the Bkg Deviation method therefore is not
applicable. This is usally the case, when you use one of the global methods for
background determination.
• Min. Expression: Defines an upper and a lower expression threshold.
• Max. Ratio: Setting a Max Ratio value (the highest ratio value possible) can be very
useful, if you want to export the comparison data to another program postprocessing these data (e.g. for cluster analysis). Since these programs usually accept
numerical data only, and since calculation of ratios of values within background
range does not yield reasonable results, Microarray sets the ratio value to Max
Ratio, if the ratio calculation results in infinity. In the majority of cases, it is
reasonable, to set the Max Ratio value to 100.
Usually, you will review the statistics of the comparison using the correlation plot
displayed in the Array Scatter Plot window.
In the correlation plot, the vertical and horizontal yellow lines indicate the background
thresholds (vertical line: Master Cut Off, horizontal line: Client Cut Off), whereas the
lines shown in non-yellow colors indicate the respective expression thresholds set by the
Min. Expression spin box on the Ratio Comparison panel of the Array Definition
124
AIDA Microarray User’s Manual