1
Download User Manual
Transcript
1.3 Construction Details MGB 60 low MGB 60 high MGB 80 low MGB 80 high MGB 120 MGB 140 MGB 180 MGB 240 MGB 360 Construction technology Injection moulding Injection moulding Injection moulding Injection moulding Injection moulding Injection moulding Injection moulding Injection moulding Injection moulding Construction Norm Din-EN 840-1 Din-EN 840-1 Din-EN 840-1 Din-EN 840-1 Din-EN 840-1 Din-EN 840-1 Din-EN 840-1 Din-EN 840-1 Din-EN 840-1 HDPE – high density polyethylene Mass colouration with UV protection 0,955 g/cm3 5,55g/10 min (190/2) 180 mg/kg HDPE – high density polyethylene Mass colouration with UV protection 0,955 g/cm3 5,55g/10 min (190/2) 180 mg/kg HDPE – high density polyethylene Mass colouration with UV protection 0,955 g/cm3 5,55g/10 min (190/2) 180 mg/kg HDPE – high density polyethylene Mass colouration with UV protection 0,955 g/cm3 5,55g/10 min (190/2) 180 mg/kg HDPE – high density polyethylene Mass colouration with UV protection 0,955 g/cm3 5,55g/10 min (190/2) 180 mg/kg HDPE – high density polyethylene Mass colouration with UV protection 0,956 g/cm3 5,55g/10 min (190/2) 180 mg/kg HDPE – high density polyethylene Mass colouration with UV protection 0,955 g/cm3 5,26g/10 min (190/2) 180 mg/kg HDPE – high density polyethylene Mass colouration with UV protection 0,955 g/cm3 3,86/10 min (190/2) 180 mg/kg HDPE – high density polyethylene Mass colouration with UV protection 0,955 g/cm3 3,86/10 min (190/2) 180 mg/kg Material Processing Specific Gravity Material M.F.I. UV Stabiliser Notched Impact Test 7,6 Mj/mm2 7,6 Mj/mm2 7,6 Mj/mm2 7,6 Mj/mm2 7,6 Mj/mm2 7,6 Mj/mm2 7,6 Mj/mm2 7,6 Mj/mm2 7,6 Mj/mm2 Melting Temperature Hardness Bending Resistance Tearing Resistance 124°C 48N/mm2 20N/mm2 29N/mm2 124°C 48N/mm2 20N/mm2 29N/mm2 124°C 48N/mm2 20N/mm2 29N/mm2 124°C 48N/mm2 20N/mm2 29N/mm2 124°C 48N/mm2 20N/mm2 29N/mm2 124°C 48N/mm2 20N/mm2 29N/mm2 136°C 48N/mm2 20N/mm2 29N/mm2 126°C 48N/mm2 20N/mm2 29N/mm2 126°C 48N/mm2 20N/mm2 29N/mm2 Impact Resistance No breaks ISO R 79 No breaks ISO R 79 No breaks ISO R 79 No breaks ISO R 79 No breaks ISO R 79 No breaks ISO R 79 No breaks ISO R 79 No breaks ISO R 79 No breaks ISO R 79 Liquid Absorption >600% ISO R 527 none >600% ISO R 527 none >600% ISO R 527 none >600% ISO R 527 none >600% ISO R 527 none 1,65 10-4 (DIN 52328) none 1,40 10-4 (DIN 52328) none 1,40 10-4 (DIN 52328) none 1,40 10-4 (DIN 52328) none Corrosion Resistance 100% 100% 100% 100% 100% 100% 100% 100% 100% Lengthening The bins are manufactured from high quality raw material, meeting the highest client expectations and guaranteeing long service life and stability, even after several years of use. 3
