Download USER'S MANUAL - longshine networking

Hardware Setup
2.2e VFD Customer Display Installation…
Package Content
y A VFD
y VFD Pole x 2
y A cable clip
y A circular base
y A COM cable
y Screw x 2
Assemble and Disassemble the Circular pole
There are two standard pole heights that may be ordered. You can regulate the height of VFD for
your preference. To assemble the circular base:
1. On the circular poles, first aim the convex hole of one pole at the concave hole of another one.
2. Put the convex hole into the concave hole as the picture shown.
3. Fasten the two poles.
To disassemble the pole, revolve two poles with a counter power.
20