Download User Manual - My Trade 24

User Manual
Dear Customers
Thanks for your buying our led panel products.Please read the instruction carefully
before using.
Please keep it .
Notice：
1.Indoor using only.
2.Please confirm if the product is unbroken during the transport before using.
3.Please let the children far away from the package material,avoiding the children eat the small fittings.
4.Please let the children far away from the product,and don't let them touch the electronic equipment.
5 .Avoiding looking at the LED light-emitting area directly.
6.Don't put anything on the product,and far away from the fire and high temperature object.
7.Non-professional people is prohibited dismantling and repairing,we won't supply the replacing or
repairing service for the products which have been privately dismantling and repairing.
8.Please turn off the power before cleaning the light fitting,and use dry and soft fabric,don't use chemical
or corrosive things.
1
Installation Instructions
Notice:
1.The installing must be done with approved professional electrician.
2.Please check the product if it was broken during the transport before using.
3.The distance between the products and the inflammable material should be 0.2m at least.To pay
attention to distinguish the low voltage and the high-voltage,separately go line.
4.The wire behind the light fitting can be fixed by cable clip.Ensure fixed tightly.
5.Ensure the wire of power supply is long enough,don't have tension or tangential force.Avoid big
tension,and don't tie a knot.And don't mix up the output wire.
6.After installing,connect the input wire of led panel light with output wire of power supply.
7.Connect the input wire of power supply with electric supply,generally speaking,the brown line is battle
line,and the blue line is null line.
8.Don't use the professional led panel driver for other lighting.
Installation Method:
First Way:Recessed
1.Take off the ceiling.
2.Connect the wire of power supply.
3.Put the led panel light at the cassette.
4.Power on it after it was installed well.
2
Second Way:Suspending
1.Fixed the hanger on the ceiling.
3.Install the two accessories
2.Find out the two accessories in below image
4.Install one end of the wire at the hitch on the led panel.one
by one for 4 wires.
5.Install other end of the wire on the hooking.
6.Install the four wires on the hooking on the ceiling.
Third Way：Mounted
1.Fix the hitch on the led panel with screw.
3
2.Drill a hole according the distance of four hitches,then put the plug into.
3.Fix the four screws on the wall.
4.Put on the led panel,and connect the power wire.
Installation rendering Drawings
Recessed
Suspending
4
Mounted