Download User Manual

ww.foscam.com
2 Surveillance Software GUI
Please refer to the Quick Installation Guide if you install the camera at first time. After finishing
quick installation, you can take time to learn the operation of the software.
2.1 Login Window
1
2
3
4
5
Figure 2.1
Please check the login window above, it was divided to 5 sections from no. 1 to 5.
Section1
Enter the User name and password
The default administrator username is admin with a blank password, please reset the password
at first using and prevent unauthorized users login the camera (read chapter 3.2.4 about how to
change).
Section2
Media port
The Media port is used to transfer video stream, and the default port no. is 888, you can reset the
port no. between 1 ~65535 on the Settings-NetworkPort page. The camera will obtain the
port no. automatically, you need not to fill it manually.
Section3
Stream
The camera supports two stream modes: Main stream and sub stream. If you want to access the
camera form LAN, here you can select Main stream. If you want to access the camera from
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
7
7