Download Installation and operating instructions

Mounting and installation
Inserting the SIM card
4.10
4
7.
- Insert the SD card.
8.
- Fold the bracket for the SD card down, and lock it in position.
9.
- Fold the bracket for the SIM card down, and lock it in position.
10.
- Screw the cover onto the rear of the terminal.
⇨ You have inserted the SD card.
Inserting the SIM card
The terminal must be equipped with a SIM card so that you can use the farmpilot portal. If you do not
intend to use the farmpilot portal, you will not need any SIM card.
Which SIM card?
You must purchase the SIM card from your mobile phone provider.
Select a mobile phone provider that can guarantee good mobile phone reception on your fields. A
good connection is required in order for your work with the farmpilot portal to run smoothly.
The SIM card must meet the following requirements:
▪ It must be GPRS-capable.
▪ It must be PIN-free. Inform your mobile phone provider about this requirement before purchasing
the SIM card.
▪ The contract must enable data transfer.
Procedure
Insert the SIM card as follows:
1. Switch off the terminal and disconnect all cable connections.
2.
Copyright © Müller-Elektronik GmbH & Co.KG
- Unscrew the cover on the rear of the terminal.
21