Download Operating Instructions Type 8221

Type 8221
Wiring
7.2.8. Installation of a 8221 with PG13.5
connection onto a hygienic holder
with clamp connection
8.
Wiring
8.1.
Wiring of the 8221 with 4
electrodes, with 1.5" clamp (short
and long) or G1¼" connections
• To avoid any mechanical damage to O-rings on assembly,
they should be lightly greased.
• After assembly, clean the probe of any remaining drops of grease.
1
2
→→Ensure there is no damage to the probe or the holder.
→→Check that all o-rings are in place in their appropriate grooves,
and are free of damage.
→→Make sure the holder 2 is fixed onto the clamp of the pipe.
→→Screw the probe 1 in the holder 2
Fig. 16: Installation of a 8221 with PG13.5 connection onto a
holder with clamp connection
Signal description
Cable
color
Bürkert device connected
Type 8285
Type 8619
Pt1000 (low end)
grey
18
7 SE
Pt1000
white
19
8 TS
Pt1000
blue
17
9 TS
Current electrode (high
end)
pink
1
1 C+
Potential electrode (high
end)
green
2
2 P+
Potential electrode (low
end)
brown
3
3 P-
Current electrode (low
end)
yellow
4
4 C-
Not connected on probe
shield
16
6 FE
red
-
-
-
short 4 and
5
-
Not connected
Note:
English
19