Download OPERATING INSTRUCTIONS ROLLING DOOR

1. CONTENTS
The CE declaration and the warranty will void if components are changed.
1.
Contents .................................................... 3
2.
General instructions .................................. 3
3.
Safety-related regulations ......................... 4
4.
Safety instructions ..................................... 4
5.
Mounting .................................................... 5
6.
Anti-Drop Safeguard .................................. 6
7.
Initial operation .......................................... 6
2.4 Target group
8.
Technical data ......................................... 12
9.
Dimensions .............................................. 12
Only qualified and trained specialists are permitted to
mount the operator and perform mechanical maintenance.
10. Drawings.................................................. 13
11. Maintenance ............................................ 14
12. Transport, Storage, Disposal................... 14
13. Service, Spare parts, Accessories .......... 14
14. Declaration of conformity......................... 15
15. Annex ...................................................... 16
2. GENERAL INSTRUCTIONS
2.1 Original operating instructions
Only original spare parts and by the manufacturer approved accessories shall be used. These parts are
used to maintain the quality and safety of the machine. Changes are only permitted after consultation with
the manufacturer.
Only qualified and trained electricians may connect
the operator and carry out the electrical maintenance.
Qualified and trained people have knowledge of general and specific safety and accident prevention regulations, the relevant regulations and standards, training
in the use and maintenance of adequate safety
equipment, as well as the ability to recognize hazards
associated with their work.
This manual is the original manual.
 Copyright protection: any reproduction is permitted
2.5 Key to symbols
only with approval of the manufacturer.
 Subject to alterations in the interest of technical pro-
gress.
 All dimensions given in mm. The diagrams in this
DANGER !
Indicates a hazard with a high level of risk which, if not
avoided, will result in death or serious injury.
manual are not to scale.
WARNING !
2.2 Intended use
Indicates a hazard with a medium level of risk which, if
not avoided, could result in death or serious injury.
The operator series TDA2, TDA4 and TDA6 are designed exclusively for opening and closing doors (such
as rolling doors or rolling grilles) which have to be
secured against falling.
CAUTION !
For other applications of the operators, the manufacturer must be consulted.
Indicates a hazard with a low level of risk which, if not
avoided, could result in minor or moderate injury.
NOTICE !
2.3 Warranty
Indicates an imminent danger of damage or destruction.
The function and safety of the equipment is only guaranteed if the warning and safety instructions included
in these operating instructions are adhered to.
INFORMATION !
The manufacturer is not liable for injury to persons or
damage to property if these occur as a result of the
warnings and safety advice being disregarded.
Reference to separate documents which must be complied with.
3