Download Operating Instructions

Chapter 4 Settings - [DISPLAY OPTION] menu
4) Press qw to switch the item.
ff The items will switch each time you press the button.
[CC1]
Displays CC1 data.
[CC2]
Displays CC2 data.
[CC3]
Displays CC3 data.
[CC4]
Displays CC4 data.
Note
ff Closed captions are a function that is mainly used in North America to display text information with video signals. Captions
may not be displayed depending on the connected devices or software being played back.
ff [CLOSED CAPTION SETTING] can only be selected if an NTSC or 480i YCBCR signal is input.
ff If [CLOSED CAPTION SETTING] is set to [ON], the brightness of image may be changed according to the external devices
or the used content of the closed caption corresponding connection.
ff If a closed caption signal of the selected mode is input, the text is not displayed even when the [SECURITY] menu → [TEXT
DISPLAY] (Æ page 74) is set to [ON].
ff Closed captions are not displayed when the menu screen is displayed.
[STARTUP LOGO]
Set the logo display when the power is turned on.
1) Press as to select [STARTUP LOGO].
2) Press qw to switch the item.
ff The items will switch each time you press the button.
[DEFAULT LOGO]
[USER LOGO]
[OFF]
Displays the Panasonic logo.
Displays the image registered by the user.
Disables the startup logo display.
Note
ff The startup logo will disappear in approximately 30 seconds.
ff To create/register the [USER LOGO] image, use “Logo Transfer Software” included in the supplied CD-ROM.
ff If you do not register the [USER LOGO] image, the startup logo will not be displayed even if the [STARTUP LOGO] is set to
[USER LOGO].
62 - ENGLISH