Download SSS CELECT PLUS Troubleshooting

30/04/09 6:33 PM
CAUTION
To avoid pin and harness damage, use the following test lead when taking a
measurement:
Part Number 3822758 - male Deustch/AMP/Metri-Pack test lead.
CAUTION
To avoid pin and harness damage, use the following test lead when taking a
measurement:
Part Number 3822758 - male Deutsch/AMP/Metri-Pack test lead.
CAUTION
To avoid pin and harness damage, use the following test lead when
performing this procedure:
Part Number 3822917 - female Deutsch/AMP/Metri-Pack test lead.
CAUTION
To avoid pin and harness damage, use the following test lead when taking a
measurement:
Part Number 3822917 - female Deutsch/AMP/Metri-Pack test lead.
Troubleshooting Steps
STEPS
STEP 1.
SPECIFICATIONS
Check the accelerator pedal.
STEP 1A. Verify the accelerator
position sensor is connected to the
OEM harness.
Sensor connected
Page 3 of 15