Download Operating instructions

CVS Compressor RPO 200/300/400/600/800
Maintenance
8.4.2
Oil change
CAUTION!
Perform the oil change with warm, switched off and
pressure-free unit. The oil temperature should be
30…40°C.
Oil level times
„ The oil level time depends on the operating conditions and the
compression final temperature. The oil level time is reduced after the compressor is not run within the limits indicated in the
Chapter "Specifications".
„ The oil level times can be significantly increased by contamination.
„ CVS engineering recommends including the oil manufacturer in
the oil test and to perhaps schedule new oil change intervals.
Oil change on model with oil drain
screw
52
1.
Ventilate the safety valve. See Page 55, Chapter 8.5.
2.
Perform a pressure check on vehicle-side gauge.
3.
Unscrew the oil drain screw (92A).
4.
Drain oil into suitable container. Empty compressor completely.