Download NuTone 791LEDNT Instructions / Assembly

MODEL 791LEDNT
Page 2
NOT FOR USE IN A COOKING AREA
Do not install above or inside this area
INSTALL THE HOUSING
New Construction
45°
45°
1. Choose the location for your fan/light in the ceiling. For
best possible performance, use the shortest possible duct
run and a minimum number of elbows.
TAB
Cooking
Equipment
Floor
PREPARE THE HOUSING
TAB
MOUNTING SCREWS
BOTTOM EDGE OF JOIST
2. Position fan housing against joist so that bottom
edge of housing will be flush with finished ceiling.
Additional positioning feature for 1/2” thick
ceiling material:
Bend tab, on either side of housing, 900 outward. Lift
housing until tab contacts bottom edge of joist.
3. Use (4) mounting screws (included) to attach housing
to joist.
1. Unplug blower and remove (3) screws securing blower
assembly to housing.
Existing Construction
1. Choose the location for your fan/light in the ceiling. For
best possible performance, use the shortest possible duct
run and a minimum number of elbows.
2. In attic,
position fan
housing
against joist.
Trace outline
of housing
on ceiling
material.
2. Remove blower
assembly from
housing and set
blower assembly
aside.
3. Unplug light wires
from white receptacle.
Remove wiring plate
from housing and set
plate aside.
3. Set housing aside
and cut ceiling
opening slightly
larger than marked.