Download LightShow 87454 Instructions / Assembly

pg.2
USE AND CARE INSTRUCTIONS
1. Before using or reusing, inspect product carefully. Discard any products that have cut, damaged, or frayed wire insulation
or cords, cracks in the lampholders or enclosures, loose connections, or exposed copper wire.
2. When storing the product, carefully remove the product from wherever it is placed, to avoid any undue strain or stress on
the product conductors, connections, and wires.
3. When not in use, store neatly in a cool, dry location protected from sunlight.
USER SERVICING INSTRUCTIONS
To replace the fuse:
1. Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord.
2. Open fuse cover. Slide open fuse access cover on top of attachment plug towards blades.
3. Remove fuse carefully. Turn fuseholder over to remove fuse.
4. RISK OF FIRE. Replace fuse only with 3 Amp, 125Volt fuse (provided with product.)
5. Close fuse cover. Slide closed the fuse access cover on top of attachment plug.
6. RISK OF FIRE. Do not replace attachment plug. Contains a safety device (fuse) that should not be removed.
Discard product if the attachment plug is damaged.
Replace the lamp
1. Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord.
2. Pull lamp and plastic base straight out of lampholder.
3. Replace lamp with 3.6Volt, 0.072 Watt flashing lamps (provided with product). If the new lamp base
does not fit in lampholder, follow the steps below before step 3:
a) Remove the base of burned out lamp by straightening lamp leads and gently pull lamp out.
b) Thread leads of new lamp through holes in old base with one lead in each hole.
c) After lamp is fully inserted into base, bend each lead up, like other lamps in the light set so that the leads
will touch the contacts inside the lampholder.
4. The lamp base to the individually-flashing lamps is not intended to be exchanged with another lamp.
CAUTION
This string is rated 12 Watts ( 0.1Amps ), do not overload. Connect other Lighting Strings or decorative outfits end-to-end up
to a maximum of 210 Watts (1.75Amps) total.
If connecting to a lighting string that does not have a wattage (W) rating (found on the tag within 6 inches of the plug),
Calculate The wattage (W) as follows: Multiply the current (0.1A) which is on the flag type tag Within 6 inches of the plug,
by 120.
For example, string is rated 120V, 60Hz, 0.1Amps, 0.1×120=12 Watts.
Add the wattage of each light string together for a total of 210 Watts or less. (Do not exceed 210 Watts)
Total amount of wattage that can be connected 210W-12W=198W.
CAUTION
To reduce the risk of fire or electric shock, do not attempt to replace lamps or modify string.
FOR INDOOR AND OUTDOOR USE.
THESE INSTRUCTIONS ARE FOR THESE ITEM NUMBERS
85394
87453
88511
88509
34800
18808
34797
85721
87454
88513
88498
35363
18718
34799
85722
88069
88502
88499
89746
18732
85723
88070
88503
88501
89747
18740
85726
89012
88505
89045
89748
35368
NOTE: This item is not a toy and should be used for decorative purposes only.
87244
89286
88506
89047
18804
46924
87246
88510
88507
34798
18805
42860