Transcript
Christmas Tree Sku # 000 000 Safety Information IMPORTANT SAFETY INSTRUCTIONS When using electrical products, basic precautions should always be followed, including the following: a. READ AND FOLLOW ALL SAFETY INSTRUCTIONS. b. This product is for indoor use only. c. This seasonal product is not intended for permanent installation or use. d. Do not mount or place the product near gas or electric heaters, fireplaces, candles, or other similar sources of heat. e. Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails. f. Do not let lamps rest on the supply cord or on any wire. g. Unplug the product when leaving the house, when retiring for the night, or if left unattended. h. This is an electric product and not a toy! To avoid risk of fire, burns, personal injury and electric shock it should not be played with or placed where small children can reach it. i. Do not use this product for other than its intended use. j. Do not hang ornaments or other objects from cord, wire, or light string. k. Do not close doors or windows on the product or extensions cords as this may damage the wire insulation. l. Do not cover the product with cloth, paper, or any material that is not a part of the product when in use. m.Read and follow all instructions that are on the product or provided with the product. n. SAVE THESE INSTRUCTIONS Pre-Assembly Package Contents Part A B C D E F G H I J Description Tree top, tag 1 Tree section 2, tag 2 Tree section 3, tag 3 Tree section 4, tag 4 Tree section 5, tag 5 Tree section 6, tag 6 Tree section 7, tag 7 Tree section 8, tag 8 Tree section 9, tag 9 Tree stand Quantity 1 1 1 1 1 1 1 1 1 1 Choose a location near a wall outlet, begin to assemble the tree. Follow below steps: Step 1. Connect part 1 to 2, then screw part 7(Bolt). Step 2.Connect part 2 to 3, then screw part 8(Bolt) Step 3. Insert tree section 9 (I) to bottom cross frame(J), and then insert tree section 8 (H) to section 9 (I), then section 7(G) to section 8 (H). Step 4. Connect part 3 to part 4, then screw part 7(Bolt). Step 5.Connect part 4 to part 6, then screw part 8(Bolt). Assembling the tree Step 1.Remove the protective caps, insert the section 6 (F) into the section 7 (G),and insert the section 5 (E) into the section 6 (F). Step 2.Insert the section 4 (D) into the section 5 (E), and insert the section 5 (E) into the section 6 (F), Step 3.Insert the section 2 (B) into the section 3 (C), insert the tree top (A) into the section 2 (B). Step 4.Shape the branches to your preference by working from the bottom to the top. When adjusting branches, ensure that all wires are free of branch hinges. Step 5.Connect the plug(s) securely to the extension cord(s) as per the color labels indicated in attached photo and insert the green label extension cord plug into the wall outlet. Step 6.When finished shaping the branches, slightly upsweep all branch tips for a uniform look. Catuion: to avoid over current, please connect lighting string accrding to the strings layout for the tree. (see diagram below) 50 Lights+100 Lights 50 Lights+100 Lights Name 2 100 Lights 100 Lights+100 Lights 50 Lights+100 Lights Tree Stand Part List No. Insert Red Label Plugs Into Red Labeled Extension Cord 1 100 Lights+100 Lights Assembly Assembling the tree stand 100 Lights+100 Lights Qty 50 Lights+100 Lights . 1 2 3 4 5 6 7 Bottom Cross Frame 1 PC Horizontal Connection Frame 4 PCS Vertical Connection Tube 4 PCS “L” Shape VerticalTube 4 PCS Tube For Hooking Branches 1 PC Top Cross Flame 1 PC Bolt - Spec M8*16mm 8 PCS 8 9 10 Bolt - Spec M8*50mm 8 PCS Nut - Spec M8 8 PCS Triangle Bolt - Spec M6*18mm 6 PCS 50 Lights+100 Lights +100 Lights 100 Lights+100 Lights +100 Lights Insert Yellow Label Plugs Into Yellow Labeled Extension Cord 3 4 Insert Blue Label Plugs Into Blue Labeled Extension Cord 5 6 Insert Purple Label Plugs Into Purple Labeled Extension Cord 50 Lights+100 Lights +100 Lights+100 Lights 7 Insert Orange Label Plugs Into Orange Labeled Extension Cord 8 100 Lights+100 Lights +100 Lights+100 Lights 9 100 Lights+100 Lights Insert Green Label Plug Into Wall Outlet Extension Cord to Wall Outlet Electrical Rating for the tree: 4.42A 120V 60Hz Extension Cord to Wall Outlet Electrical Rating for the tree: 5.10A 120V 60Hz Foot Pedal on/off Switch