Download HomeSelects 6160 Instructions / Assembly

Flathead
Screwdriver
Metal Fixture
Wire Nuts (3)
Canopy
Glass Globe
Nut
Threaded Rod
Nut
Safety
Goggles
Threaded Rod
Wire
Strippers
Mounting Screws (2)
PARTS INCLUDED
Phillips
Screwdriver
(not included):
Fluorescent
LED
For energy savings we recommend
using a CFL or LED bulb in the light.
Washers (2)
Electrical
Tape
TOOLS REQUIRED FOR INSTALLATION AND ASSEMBLY
NOTE: If you have electrical questions, consult your local electrical code for
approved grounding methods.
1. Install the canopy mounting bracket to the ceiling box with supplied screws.
2. Make the wiring connections using the supplied wire nuts from the light fixture
to the supply wires in the ceiling box.
6. Slide the canopy housing over the mounting bracket and secure with the mounting screws.
7. Install light bulbs (not included).
8. Install the glass - metal fixture using the canopy screws.
DANGER: Before installation, turn off the main
power at the circuit breaker.
CAUTION:
INSTALLATION INSTRUCTIONS:
INSTALLATION:
Nut
Fixture Ground Wire
Supply Ground Wire
Mounting Screws
Outlet Box
Tuck wires into ceiling box.
White Supply Wire
Ceiling
Threaded Rod
Fixture Housing
Black Fixture Wire
White Fixture Wire
Wire Nuts
Black Supply Wire
Outlet Box
WARNING: Installation should be performed by a
qualified licensed electrician.