Download HomeSelects 6112 Instructions / Assembly

Flathead
Screwdriver
Wire Nuts (3)
Glass - Metal Fixture
Canopy
Safety
Goggles
Fluorescent
LED
For energy savings we recommend
using a CFL or LED bulb in the lamp
Electrical
Tape
Canopy Screws (4)
Mounting Bracket
Wire
Strippers
Mounting Screws (2)
PARTS INCLUDED
Phillips
Screwdriver
(not included):
TOOLS REQUIRED FOR INSTALLATION AND ASSEMBLY
NOTE: If you have electrical questions, consult your local electrical code for
approved grounding methods.
1. Install the canopy mounting bracket to the ceiling box with supplied screws.
2. Make the wiring connections using the supplied wire nuts from the light fixture
to the supply wires in the ceiling box.
6. Slide the canopy housing over the mounting bracket and secure with the mounting screws.
7. Install light bulbs (not included).
8. Install the glass - metal fixture using the canopy screws.
DANGER: Before installation, turn off the main
power at the circuit breaker.
CAUTION:
INSTALLATION INSTRUCTIONS:
INSTALLATION:
Canopy Screws
Fixture Ground Wire
Mounting Screws
Mounting Bracket
Supply Ground Wire
Outlet Box
Tuck wires into ceiling box.
Light Bulbs Not Included
Ceiling
Glass - Metal
Frame Fixture
Canopy Screws
Fixture Housing
Black Fixture Wire
White Fixture Wire
Wire Nuts
White Supply Wire
Black Supply Wire
Outlet Box
WARNING: Installation must be performed by a
qualified licensed electrician.