Download Palram 701944 Use and Care Manual
Transcript
A I M ssembly Instructions nstructions de montage ontageanleitung Essence 8’x12’ - TwinWall Glazing 366x242.5x231cm / 144"x95½"x91" Email: [email protected] I www.palramapplications.com EN a IMPORTANT Please read these instructions carefully before you start to assemble this greenhouse. Keep these instructions in a safe place for future reference. a Customer Service For assistance with assembly or for replacement parts – please log onto our website or call our service line (number is on the title page). Additional information can be found at our website: www.palramapplications.com a • • • • • • • • • • • • Safety Advice It is of utmost importance to assemble all of the parts according to the directions. Do not skip any step. We strongly recommend using work gloves during assembly. Always wear shoes and safety goggles when working with extruded aluminium. If using a step ladder or power tools ensure that you follow the manufacturer’s safety advice. Do not touch overhead power cables with the aluminium profiles. Do not attempt to assemble the greenhouse in windy or wet conditions. Dispose of all plastic bags safely keep them out of reach of small children. Keep children away from the assembly area. Do not lean against or push the greenhouse during construction. Do not position your greenhouse in an area exposed to excessive wind. Do not attempt to assemble this greenhouse if you are tired, have taken drugs or alcohol or if you are prone to dizzy spell. Hot items such as recently used grills, blowtorches etc. must not be stored in the greenhouse. Ensure there are no hidden pipes or cables in the ground before inserting the pegs. This product is designed to use as greenhouse only. Before Assembly This is a multi-part assembly best achieved by two people. Allow at least half a day for assembly process. Selecting a site - the greenhouse must be , positioned and fixed on a flat level surface. Choose a sunny position away from overhanging trees. We are strongly recomend to fix your greenhouse directly to a solid concrete foundation. When doing that use the pre drilled holes in the metal base supplied. Take out all components parts of the packages. Sort the parts and check against the contents parts list. During assembly parts should be laid out close at hand. Keep all small parts (screws etc.) in a bowl so they do not get lost. In purpose to facilitate parts’ identification and assembly process, all-positioned profiles are used in this greenhouse. As a result some apertures in the profiles are not used during assembly. a During Assembly Carry out the assembly steps in the order set out in the instructions. Step 1: Make sure the base is square by measuring the diagonals and level by using a spirit level. Step 5: Part 7063 is the greenhouse threshold. Fixing it determines the front side of the greenhouse. Steps 8: The oval hole in the crossbars A256 should always be assembled to the base of the greenhouse. Steps 47: Decide on the windows’ location before assembly. Windows can be installed in two of the indicated options. Step 79: Firmly connect the greenhouse to a level final position immediately after completion of the assembly. • a Care & Maintenance When your greenhouse needs to be cleaned, use a mild detergent solution and rinse with cold clean water. DO NOT use acetone, abrasive cleaners or other special detergents to clean the clear panels. It is recommended to check periodically that roof panels caps (plastic part 329 & profile 981) are set in place. a Tools & Equipment • Tape measure • Work gloves • Lubricant • Phillips head screwdriver • Step ladder • Drill bit • Large hammer • Spanner • T001 - Special tool for Screws 411 and nuts 412 • Screws 411 and nuts 412 are used throughout the assembly process. • Screws 411 are to be assembled from the outside and nuts 412 from the inside of the greenhouse. • If not specified otherwise, do not fasten screws and nuts (411 & 412) more than 2-3 turns • only. Do not tighten them until completion of the panels’ assembly. These 2 icons indicate if screws’ tightening is required or not. However, in some steps, temporary tightening of a few screws may be needed to prevent a profile from falling till it will be fully connected in the next steps. FR IMPORTANT ! Veuillez lire attentivement ces instructions avant de commencer à monter votre serre. Conservez ces instructions en lieu sûr pour toute consultation ultérieure. a Service clientèle Pour toute assistance concernant le montage de la serre ou ses pièces de rechange – veuillez consulter notre site Internet ou appeler notre service technique (dont le numéro de téléphone figure sur la couverture de la brochure). Pour en savoir plus, n’hésitez pas à visiter notre site Internet : www.palramapplications.com a Consignes de sécurité • Très important ! Veuillez suivre scrupuleusement les instructions de cette brochure et réaliser les étapes dans l’ordre énoncé. • Nous recommandons vivement le port de gants de protection pendant le montage. • Portez toujours des chaussures de travail et des lunettes de protectrion lorsque vous travaillez des pièces en aluminium extrudé. • Lors de l’utilisation d’une échelle ou d’outils électriques, assurez-vous de bien suivre les consignes de sécurité du fabricant. • Veillez à ne pas toucher de câbles aériens avec les profilés en aluminium. • N’essayez pas de monter la serre s’il y a du vent ou s’il fait humide. • Jetez tous les sacs en plastique en appliquant les règles de sécurité et maintenez-les hors de portée des jeunes enfants. • Eloignez les enfants de la zone d’assemblage. • Ne vous appuyez pas contre la serre et ne la poussez pas pendant le montage. • Ne positionnez pas la serre dans un endroit trop exposé au vent. • N’essayez pas de monter la serre si vous êtes fatigué, si vous êtes sous l’effet de drogues, de médicaments ou d’alcool ou encore si vous êtes sujet aux vertiges. • Les objets chauds tels qu’un barbecue, un chalumeau ou autre article ayant été récemment utilisés, ne doivent pas être rangés dans la serre. • Avant de planter les piquets, assurez-vous qu’aucun tuyau ni câble n’est enterré à l’endroit sélectionné pour l’installation. • Ce produit est conçu pour servir de serre exclusivement. a Entretien & Maintenance Pour nettoyer votre serre, utilisez une solution détergente douce et à rincez à l’eau claire et froide. NE PAS utiliser d’acétone ni de produits nettoyants ou autres détergents spéciaux pour nettoyer les panneaux clairs. Il est recommandé de vérifier régulièrement que les couvrejoints des panneaux du toit sont bien en place (pièces en plastique 329 & profilé 981). a • • • • • Outils & Equipement Mètre (ruban) Gants de travail Lubrifiant Tournevis cruciforme (Philips) Escabeau • Perceuse • Grand marteau • Clé à écrous • T001 – outil spécial pour vis 411 et écrous 412 a Avant le montage EIl s’agit d’un assemblage à pièces multiples qu’il est préférable de réaliser à deux personnes et auquel il fait consacrer au moins une demijournée. Sélection du site – la serre doit être montée et fixée sur une surface plane. Choisissez un emplacement ensoleillé et éloigné d’éventuels arbres susceptibles de la surplomber. Nous recommandons vivement de fixer la serre directement à de solides fondations en béton. Pour ce faire, utilisez les trous déjà percés dans le châssis métallique fourni. Sortez toutes les pièces de leurs emballages. Triez-les et comparez-les avec la liste des pièces pour vérifiez que tout y est. Lors de l’assemblage, les pièces doivent être disposées à portée de main. Gardez toutes les petites pièces (vis, etc.) dans un récipient pour éviter de les perdre. a Pendant le montage Procédez au montage étape par étape, en respectant l’ordre énoncé dans cette brochure. Etape 1 : Assurez-vous que le châssis est bien carré en mesurant les diagonales, et vérifiez sa mise à niveau à l’aide d’un niveau à bulle. Etape 5 : Partie 7063 est le seuil à effet de serre. Qu’il détermine la fixation de la face avant de l’effet de serre. Etapes 8 : L’ouverture ovale des barres transversales A256 doit toujours être placé du côté du châssis de la serre. Etapes 47 : Choisissez l’emplacement de la fenêtre avant le montage, parmi les options indiquées. Etape 79 : Immédiatement après avoir terminé l’assemblage, fixez solidement la serre en position finale, parfaitement horizontale. Pour faciliter l’identification des pièces et la procédure de montage, les profilés utilisés pour la construction de cette serre sont tous déjà en place. En conséquence, certaines ouvertures des profilés restent inutilisées pendant le montage. Les vis 411 et écrous 412 servent tout au long de la procédure. l Les vis 411 se placent à l’extérieur et les écrous 412 à l’intérieur de la serre. l S’il n’est pas spécifié autrement, Ne serrez les vis et écrous (411 & 412) que de 2 à 3 tours, pas plus. Ne les serrez pas tant que l’assemblage n’est pas complètement terminé, sauf indication contraire. Ces deux icônes indiquent si le serrage des vis est nécessaire ou non. l Cependant, la réalisation de certaines étapes peut nécessiter le serrage provisoire de quelques vis pour empêcher un profilé de tomber en attendant qu’il soit entièrement intégré à l’ensemble de la structure dans les étapes suivantes. DE WICHTIG Bitte lesen Sie diese Anweisungen sorgfältig durch, bevor Sie mit dem Aufbau des Gewächshauses beginnen. Heben Sie diese Anweisungen an einem sicheren Ort auf, um später auf sie zurückgreifen zu können. a Kundendienst Für Hilfe bei dem Aufbau oder für Ersatzteile – können Sie sich entweder auf unserer Webseite einloggen oder unseren Kundendienst anrufen (die Nummer steht auf der Titelseite). Weitere Informationen finden Sie auf unserer Webseite: www.palramapplications.com a l l l l l l l l l l l l l Sicherheitshinweise Es ist von grösster Wichtigkeit, alle Teile genau gemäss den Anweisungen zusammenzubauen. Lassen Sie keinen Schritt aus. Wir empfehlen wärmstens, während des Aufbaus Arbeitshandschuhe zu tragen. Tragen Sie immer Schuhe und eine Schutzbrille, wenn Sie mit stranggepresstem Aluminium arbeiten. Wenn Sie eine Stufenleiter oder Elektrowerkzeuge benutzen, achten Sie darauf, die Sicherheitshinweise des Herstellers zu befolgen. Berühren Sie mit den Aluminiumprofilen keine Oberleitungen. Versuchen Sie nicht, das Gewächshaus bei windigem oder regnerischem Wetter zusammenzubauen. Entsorgen Sie alle Plastiktüten sicher und bewahren sie ausserhalb der Reichweite von kleinen Kindern auf. Halten Sie Kinder vom Aufbaubereich fern. Während des Aufbaus sollten Sie sich nicht gegen das Gewächshaus lehnen oder es drücken. Bauen Sie Ihr Gewächshaus nicht an Orten mit hoher Windbelastung auf. Versuchen Sie nicht, dieses Gewächshaus aufzubauen wenn Sie müde sind, unter dem Einfluss von Drogen oder Alkohol stehen oder zu Schwindelanfällen neigen. Heisse Geräte wie kürzlich benutzte Grills, Schneidbrenner usw. dürfen nicht im Gewächshaus gelagert werden. Vergewissern Sie sich vor Einsetzen der Pflöcke, dass sich keine versteckten Rohre oder Kabel im Boden befinden. Dieses Produkt ist nur für den Einsatz als Gewächshaus geeignet. a Pflege und Wartung Benutzen Sie eine milde Reinigungslösung für die Reinigung Ihres Gewächshauses und spülen es danach mit kaltem, sauberen Wasser ab. Benutzen Sie AUF KEINEN FALL Azeton, Scheuermittel oder andere spezielle Reinigungsmittel, um die klaren Platten zu reinigen. a Werkzeuge & Ausrüstung Maßband Arbeitshandschuhe l Plastik- oder Gummihammer l Schmiermittel l Kreuzschitzschraubenzieher l Stufenleiter l Bohrer l Grosser Hamme Schere Schlüssel l T001 l l l l a Vor dem Zusammenbau Diese ist eine Mehrteilige Montage. Der Zusammenbau der Teile wird am besten von zwei Leuten bewältigt. Rechnen Sie mit mindestens einem halben Tag für den Zusammenbau. Wahl des Standorts - das Gewächshaus muss auf einem flachen ebenen Untergrund aufgebaut und fixiert werden. Wählen Sie eine sonnige Stelle ohne überhängende Bäume. Wir empfehlen Ihnen sehr Ihr Gewächshaus direkt auf einem soliden Betonfundament zu befestigen. Dazu sollten Sie die vorgebohrten Löcher in der gelieferten Metallbasis benutzen. Nehmen Sie alle Teile aus der Verpackung. Sortieren Sie die Teile und überprüfen Sie sie mit Hilfe der Inhaltsliste auf Vollständigkeit. Während des Aufbaus sollten die Teile in Ihrer Nähe auf dem Boden ausgelegt werden. Bewahren Sie alle kleinen Teile (Schrauben usw.) in einer Schüssel auf, sodass sie nicht verloren gehen. Um die Identifikation der Teile zu erleichtern und um die Montage zu vereinfachen, werden gleiche Profile in verschiedene Positionen eingebaut, sodass bei manchen Positionen einige Löcher dieser Profile während der Montage nicht verwendet werden. a Während des Zusammenbaus Führen Sie den Aufbau in der in den Gebrauchsanweisungen aufgeführten Reihenfolge Schritt per Schritt aus. Schritt 1: Vergewissern Sie sich, dass die Basis sowohl quadratisch als auch waagrecht ist, indem Sie die Diagonalen messen und die Basis mit einer Wasserwaage prüfen. Schritt 5: Teil 7063 sind in der Rückseite des Gewächshaus und deren Festsetzung bestimmt die Vorderseite des Gewächshauses. Schritte 8: Das ovale Loch in den Querbalken A256 sollte immer auf die Basis des Gewächshauses montiert werden. Schritte 47: Entscheiden sie über die genaue Lageposition des Fensters vor dessen Einbau. Das Fenster kann in einer der angegebenen Optionen installiert werden. Schritt 79: Befestigen Sie das Gewächshaus auf eine endgültige Position direkt nach Beendigung des Aufbaus auf einem waagrechten Untergrund. Les vis 411 et écrous 412 servent tout au long de la procédure. l Les vis 411 se placent à l’extérieur et les écrous 412 à l’intérieur de la serre. l S’il n’est pas spécifié autrement, Ne serrez les vis et écrous (411 & 412) que de 2 à 3 tours, pas plus. Ne les serrez pas tant que l’assemblage n’est pas complètement terminé, sauf indication contraire. Ces deux icônes indiquent si le serrage des vis est nécessaire ou non. l Cependant, la réalisation de certaines étapes peut nécessiter le serrage provisoire de quelques vis pour empêcher un profilé de tomber en attendant qu’il soit entièrement intégré à l’ensemble de la structure dans les étapes suivantes. Conte nts Item 7071 7073 Inc./cm Qty. Item Inc./cm Qty. 1 7069 2 7070 2 972 4 973 2 10 993 10 7068 4 983 1 994 1 7075 1 995 1 7074 1 Contents Inc./cm Item Qty. Item Inc./cm Qty. 996 4 7058 2 7076 4 7059 2 966 6 7060 3 256 8 7063 2 991 2 990 2 7061 1 989 2 981 12 7062 2 Contents Item 7064 7072 992 984 3017 Inc./cm Qty. Item Qty. Item Qty. Item Qty. 286 4 7082 2 318 (PVC) (+4) 06 1 7067 2 7009 (PVC) (+1) 07 1 96 6 328 37 08 2 7066 2 292 2 288 10 459 3 456 6 7065 1 T001 1 926 6 24 1 4 6 4 2 4 Conte nts Item Qty. 7083 1 7084 1 7085 1 7086 7088 1 M4 x 50mm Item Qty. 343 Item M4 Item Qty. 586 2 582 4 7079 2 581 16 329 344L 2 344R 2 99 2 22 Qty. 588 1 583 3 584 3 7159 1 7160 1 10 7078 10 1 1 Item 2 7160 423 Qty. 22 4 2 Conte nts Item Qty. 463 6 462 Item Qty. 207 411 M6 (+14) 461 M6 (+2) 412 M6 (+16) 6 464 36 12 28 422 M4 (+2) 465 M4 (+1) 428 M4x10mm (+1) 24 4 248 8 447 (+1) 4008 24 411 (+1) 10 0 1 2 3 4 b b a a 366 cm / 144” 366 cm / 144” 242 cm / 95” a = b 242 cm / 95” a = b 1 7058 447 x2 7059 x2 x4 7058 / 7059 447 x4 2 7063 x2 412 x4 411 x4 7063 7063 7063 7063 3 7063 + 7063 7058 7059 x1 x1 a 4008 x4 b 7063 7058 / 7059 c 7059 4008 7058 7063 7058 4008 / 7059 4 7058 7059 x1 412 x2 7058 411 x1 7060 x1 x2 a + b 7060 b a + b 7060 a 7059 7060 5 7060 412 x2 7060 7060 x4 411 x4 6 412 411 x13 x13 a b a b b a c c c a a a b a b a 7 996 412 x4 x8 411 x8 996 411 412 8 256 412 x8 411 x8 x8 a x4 a a a a 256 256 9 995 412 x1 411 x1 x1 a b 995 b 995 995 c 256 256 a + c 10 286 412 x1 a 411 x2 x2 b 286 286 a b 11 994 412 x1 x1 411 x1 a b 994 b 994 994 c 256 a + c 256 12 286 x1 412 x2 411 x2 286 286 13 7071 x1 7071 7071 14 7075 x1 412 411 x1 a x1 b 7075 b 7075 7075 c 256 256 a + c 15 286 x1 412 411 x2 x2 286 a 286 b a b 16 7074 x1 412 411 x1 a x1 b 7074 7074 b 7074 c 256 7074 256 a + c 17 286 x1 412 x2 286 286 411 x2 18 993 x4 a 993 993 993 993 a a 993 a a 19 412 x4 411 x4 a 411 a a a 256 993 a 256 b 256 b 256 256 b b b 20 581 7160 x2 x2 7160 7160 581 7160 581 / 581 21 581 x2 581 581 581 22 972 08 x4 292 x2 412 x8 a 411 x2 x8 a 292 972 972 292 972 972 b b 08 08 x2 23 581 993 x6 x3 a 993 b 581 b 581 b 581 b 581 b 581 581 b a a a 581 993 24 318 PVC x6 a a a a a a 318 PVC a 581 25 412 x5 411 x5 a a a a a a 26 x1 972 972 972 27 a 972 a b b b b b c b 972 c 972 28 581 993 x6 x3 a 993 b 7011 b 7011 b 7011 b 7011 b 7011 b 7011 b a a 581 993 29 318 PVC x6 a a a a a a a 318 PVC 581 30 412 x5 411 x5 a a a a a a 31 972 x1 972 a + b 972 a a a a a a a + b 972 32 4008 x2 412 x1 411 x1 a 4008 b a x2 a b 411 + 412 33 7072 412 x4 411 x8 x8 x4 7072 7072 7072 411 + 412 7072 7072 a b 34 584 583 x1 x1 7068 x1 583 584 583 584 7068 7068 35 7076 412 x2 x2 411 x2 a a 7076 a 7076 7076 b c b c 36 7061 412 x1 x3 411 x3 a a 7061 a b b 7061 7061 37 7072 412 x2 a x4 x2 a 7072 7072 a 411 b b 411 a 7072 b x4 b + 412 38 584 x1 583 x1 a 7076 7064 584 a 7064 583 a 584 39 a 412 x2 411 b x2 a+b a+b c d c c d 40 7076 x2 588 412 411 x4 x1 x4 a a 588 7076 7076 588 a b b c d 7076 d c e e 41 584 583 x1 412 x2 7064 x1 411 x1 x2 a a 7064 b 7064 7064 7064 b 584 7076 b 583 584 42 412 a 411 x2 x2 a b a b b 43 973 x2 07 x1 412 411 x4 x4 a 973 973 07 a a 973 973 07 44 06 412 x1 x4 411 x4 a a 973 411 b 973 b 973 06 a 411 973 45 412 x10 411 x10 a 411 a a 412 a a b b 411 412 46 412 973 x1 973 a 411 a 973 a 973 x4 x4 47 EN GR FR SP Window Location Fenster Standort Fenêtre Emplacement Ventana Ubicación 48 288 412 7073 x4 x8 411 x4 x8 a b 411 7073 7073 7073 288 412 288 288 288 x4 x2 49 7073 x4 412 411 x4 411 412 x4 a a a 7073 b 7073 7073 a a 7073 b b b 7073 1 2 50 990 x2 x2 412 x2 a x4 411 x4 990 990 a 95 a cm 7 /3 990 3 /8 ” 411 51 7079 a x2 7079 b b 7079 a b a 990 7079 52 981 a x2 981 x2 b b 981 a c c 981 53 7073 412 x6 x4 411 x4 a 7073 b a b a b 993 a 7073 b a 7073 a 7073 a 7073 7073 b 1 b b 2 54 7078 x10 318 PVC 318 PVC x10 a a 318 PVC 7078 7078 55 7078 + 981 318 PVC x1 x1 b a 981 7078 7078 981 981 7078 56 7078 + 318 PVC x9 981 x9 318 PVC a 7078 981 7078 981 7078 981 981 7078 b 7078 981 7078 7078 7078 981 981 7078 981 7078 981 981 c 981 57 329 4043 x10 a a a a a + + + + + x10 b b b a b a b a a a a + + + + + b b b b b b 329 329 4043 b 4043 58 992 x4 a x4 586 x2 x2 3017 3017 992 3017 a 3017 a 992 992 b b 992 b 992 586 3017 586 59 989 x2 991 4008 x2 x8 x2 4008 989 a 4008 a a b 586 989 4008 b 991 991 b 4008 4008 4008 60 586 x2 7009 x4 586 586 586 x2 7009 7009 586 61 99 a x2 22 22 2 x4 22 22 99 1 a a 99 b 99 b 99 b 2 x2 1 22 62 464 422 x12 x24 465 x24 422 464 465 a a a a a a 464 a 464 63 582 x4 a 7160 x1 7159 7069 x1 b 7159 7081 x2 a b 7080 7160 582 582 582 7069 582 7069 7069 64 7068 x3 983 x1 7068 7068 983 983 7068 / 7068 65 7070 x2 a b 7070 a + b a + b a a 411 x8 66 4008 x4 7066 984 x2 x2 x2 b a 984 7066 984 4008 a b 4008 67 411 a x31 x10 a b c c x8 d b x3 d 983 7068 x10 68 7062 4008 x2 x2 x4 b a a 4008 7062 b 7062 c c 7062 4008 7062 69 7065 288 x1 412 x6 x21 a 288 a a a a 411 x4 b a 983 x4 411 x2 b 7068 411 411 a x2 7065 a a 153 cm 60 2/8 ” x6 93.6 cm 36 7/8 ” 462 16.8 cm 6 5/8 ” 70 412 x12 a a 462 a a a 71 7086 x1 a 7085 x1 7084 x1 7086 412 7083 x1 983 7088 7085 b x1 7088 M4 x 50mm 7084 423 7085 x1 423 412 x2 7083 72 7082 x2 7067 428 x2 422 x4 M4x10mm x4 M4 a a 422 412 428 7067 7082 b 422 428 983 7068 412 b 412 x4 M6 73 463 a x6 464 a+b a+b 0 180 a+b a+b b 463 a+b a+b x2 74 344L 344R x2 343 x2 b 343 343 344L 447 x2 x4 a 344 447 344L b a a 344R a b 343 75 926 461 x6 x12 412 411 x24 a x12 b 926 926 461 461 c 411 b +c a +c b +c 76 966 x6 a 966 x6 a a a 77 456 x6 461 x12 412 a 411 x24 x12 b 456 a+b+c a+b+c 966 x6 c 461 78 459 461 x3 x12 412 x12 a a a a x3 79 M96 P328 x6 x36 a M96 or b a b b a b b b b b P328 Version1_11/2011 a b
This document in other languages
- français: Palram 701944
- Deutsch: Palram 701944