1
Download NuTone ZN110H Instructions / Assembly
Transcript
Page 4 ZN110H Installation Guide New Construction Installation Snap-in and 3 Secure Housing 1 2 ! snap 4 Position Housing between joists and crimp channel on both sides of Mounting Frame to lock Housing in place. Do not crimp Housing. 3 Screws from Parts Bag 4 Attach Duct Connector and Ducting Top and bottom flanges go outside Housing 2 Insert tab into slot inside Housing 1 6" Ducting 3 Tape Screw from Parts Bag
This document in other languages
- español: NuTone ZN110H
