Transcript
K-3827 BANCROFT® COMFORT HEIGHT® TOILET Roughing-In Installation Notes Product Information Install this product according to the installation guide. Applicable product: Comfort Height toilet – left-hand trip lever Fixture: Configuration Water per flush Passageway Water area Water depth from rim Seat post hole centers Included components: Bowl Tank Tank cover Trip lever Tank attachment kit Bolt cap accessory pack K-3827 two-piece, elongated front 1.28 gpf (4.8 lpf) 2-1/8″ (5.4 cm) 11-1/4″ (28.6 cm) x 9″ (22.9 cm) 5-3/8″ (13.7 cm) 5-1/2″ (14 cm) Will comply with the American Disabilities Act (ADA) when installed per the requirements of the Accessibility Guidelines, Section 604 Water Closets, of the Act. The Model Plumbing Codes require the installation of elongated open-front toilet seats on public bathrooms. Fixture conforms to ASME Standard A112.19.2/CSA B45.1. All dimensions are nominal. K-4067 K-4383 1033723 1160365 1016548 1013092 Front Of Bowl 1" (2.5 cm) 18-1/4" (46.4 cm) 29-1/2" (74.9 cm) 11" (27.9 cm) 16-1/4" (41.3 cm) 2-3/4" (7 cm) 31-1/2" (80 cm) 10" (25.4 cm) 16-1/2" (41.9 cm) 3/8" NPT Supply 5" (12.7 cm) 12" (30.5 cm) CL Of Toilet BANCROFT® COMFORT HEIGHT® TOILET 1155370-1-A 4-1/2" (11.4 cm)