Transcript
Iso™ Technical Specification Round Mirror Stock Numbers: DN0792CH –Round Mirror Chrome Finish DN0792BN –Round Mirror Brushed Nickel Finish Materials: Round Mirror brackets are constructed of zinc and mirror is constructed of glass. DN0792 Dimensions: Installation Instructions: Directions below are for installation into drywall. If installing product into a stud, use the wood screws and washers provided only. 1. Position the mounting template on the wall in the desired location. 2. Using a level, align the template and tape it to the wall. 3. Drill two 5/16” holes as indicated on template 4. Remove the template from the wall. 5. Fold ends of the plastic toggle together and insert into each hole in the wall. 6. Lightly tap anchors until flush with the wall. 7. One at a time, insert plastic pin into each of the anchors and lightly tap to activate anchor. Remove pin and repeat on all anchors. 8. Mount mirror brackets to wall by inserting screws through the holes in the brackets into the anchors. 9. Place mirror into the bottom bracket and rotate into place behind the top bracket. Cleaning Instructions: To preserve the fine finish of this product, clean only with a soft damp cloth. Dry well. Do not use commercial or abrasive cleaners. Stock Number:___________________Oval Mirror By Creative Specialties 2 5 3 0 0 A L MO E N D R I V E N O R TH O L MS TE D , O H 4 4 0 7 0 C O R P O R A TE H E A D Q U A R TE R S : ( 8 0 0 ) 3 2 1 - 8 8 0 9 F A X: ( 8 0 0 ) 8 4 8 - 6 6 3 6 I N TE R N A TI O N A L : ( 4 4 0 ) 9 6 2 - 2 0 0 0 F A X: ( 4 4 0 ) 9 6 2 - 2 7 2 6 C U S TO ME R S E R V I C E ( U S A ) : 8 0 0 - 8 8 2 - 0 1 1 6 F A X: ( 8 8 8 ) 3 7 9 - 2 7 2 0 W W W . MO E N . C O M Copyright Creative Specialties International Literature #BA1405
