Transcript
K-5823 HARTLANDTM SELF-RIMMING KITCHEN SINK Roughing-In Installation Notes Product Information Install this product according to the installation guide. Applicable product: 4-hole sink 3-hole sink Cutout is 31-7/8″ (81 cm) by 20-3/4″ (52.7 cm) with 1-1/2″ (3.8 cm) radius corners. K-5823-4 K-5823-3 Fixture dimensions are nominal and conform to tolerances in ASME Standard A112.19.1M. Fixture*: Basin area 14″ (35.6 cm) x 18″ (45.7 cm) Water depth 7″ (17.8 cm) Drain holes 3-7/8″ (9.8 cm) D. Faucet holes 1-3/8″ (3.5 cm) D. * Approximate measurements for comparison only. Optional accessories: Hardwood countertop cutting board Bottom basin rack (left basin) Bottom basin rack (right basin) Hardwood cutting board Wire rinse basket (left basin) Wire rinse basket (right basin) 1-5/16" (3.3 cm) R. K-5917 K-6016L K-6016R K-6559 K-6603L K-6603R K-5823-4 4" (10.2 cm) 1-13/16" (4.6 cm) K-5823-3 1-13/16" (4.6 cm) 4" (10.2 cm) 7-3/8" 4" (10.2 cm) (18.7 cm) 1-1/2" (3.8 cm) 10" (25.4 cm) 1-1/2" (3.8 cm) 33" (83.8 cm) 1/2" (1.3 cm) 13-1/2" (34.3 cm) 8-1/8" (20.6 cm) 1-1/2" OD HARTLANDTM SELF-RIMMING KITCHEN SINK 115918-1-CD 22" (55.9 cm) 1-13/16" (4.6 cm)