Download All-Pro HS8 Instructions / Assembly

Transcript
HS8 625-0547.qxd:HS8 200-0701
Lighting
12/22/08
3:34 PM
Page 2
Home
Accent
INSTRUCTIONS:
1. Plug the unit into an outlet, clear from any obstructions that might limit the area
of detection. NOTE: This unit has a built-in photo cell which disables the unit
during daylight hours (or in any environment that has bright light). When selecting
an outlet, be sure that the unit will not be exposed to bright light during the time in
which you want the unit to operate. When plugged in, the red LED indicator light
on the front of the unit will come on to confirm that the unit has power.
2. When initially plugged in, the light will turn on and stay on for approximately 40
seconds (warm-up period). During this time, the unit will not respond to motion.
After 40 seconds, the light will flash three times to confirm that it is now in the
mode to detect motion. Remember: The unit will only respond to motion at night,
or when the unit is in a dark area.
3. Test the unit – This unit has approximately a 90° area of detection. Walk towards
the unit until the light comes on. NOTE: The light is more sensitive when motion
is moving across the front (side to side), as opposed to straight towards the unit.
The light will turn off 90 seconds after all motion stops.
BULB REPLACEMENT:
Remove lens cover by gently pressing sides of the lens and removing. Unscrew light
bulb. Screw in new bulb. Replace lens cover. Replace with 120V, 7 watt bulb.
CAUTION: Do not detach screws – Risk of electric shock.
WARNING: Risk of electric Shock. This product is not a toy
and is not intended for use by children. For adult use only.
For safe use, plug only into exposed wall outlets where
nightlight is ventilated and cannot contact bed coverings or
other material that may present a fire hazard. Do not use
with extension cords.
MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
ONE YEAR LIMITED WARRANTY
Cooper Lighting, LLC (“the Company”) warrants this product (“the product”) against
defects in material or workmanship for a period of one year from date of original
purchase, and agrees to repair or, at the Company’s option, replace a defective
product without charge for either replacement parts or labor during such time.
THE COMPANY SHALL NOT BE LIABLE FOR INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT.
To obtain complete warranty
information, please write to
Cooper Lighting, LLC,
1121 Highway 74 South,
Peachtree City, GA 30269 USA.
PERFECT FOR: Hallways,
bedrooms, kitchens, bathrooms,
storage areas and closets.
Lighting
1121 Highway 74 South
Peachtree City, GA 30269 USA
Made in China
www.cooperlighting.com
© 2008 Cooper Lighting, LLC
625-0547
TM