Download Dale Tiffany TT70331 Instructions / Assembly

Transcript
ASSEMBLY INSTRUCTIONS
Item No: TT70331
1.
2.
3.
FOR RETURN SHIPPING PURPOSES:
PLEASE RETAIN ORIGINAL PACKAGING
TO MINIMIZE DAMAGE.
Carefully unpack and lay out the parts as shown
in the illustration.
Screw threaded rod (B) tightly into body (A).
Place the washer(C) and shade (D) onto threaded
rod (B). Place the cover (E) on the shade (D) and
tighten with the finial (F) securing the shade in
place.
Replacing the Night Light
1. Remove the screws (A) from the bottom of the
base.
2. Pull the socket (B) out, unscrew and replace
the bulb (C).
3. Return the socket to its original position in the lamp
body (D) and tighten the screws.
Uses (1) Maximum 60WATT, Type “A” Bulb or
(1) Maximum 13WATT CFL Bulb
(Bulb not included)
Uses (1) Maximum 7WATT, Type “C” Bulb
(Bulb included)
Cleaning of your lamp
Unplug lamp, wipe with damp cloth.
Do not use abrasives.
*SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Made in China
Revision – 02/13/13
INSTRUCIONES DE ASAMBLEA:
Modelo: TT70331
PARA RAZONES DE REGRASAR: POR FAVOR
CONSERVE EL IMPAQUETADO ORIGINAL
PARA REDUCIR DAÑOS MINIMO.
1. Desembale con cuidado y diseñar las piezas
como se muestra en la ilustración.
2. Atornille la varilla roscada (B) firmemente en el cuerpo (A).
3. Coloque la arandela (C) y la pantalla (D) en la varilla roscada (B).
Coloque la tapa (E) en la pantalla (D) y apriete con el remate (F)
que sujetan la pantalla en su lugar.
Reemplazo de la luz de la noche
1. Quitar los tornillos (A) de la parte inferior de la base.
2. Tirar de la base (B) hacia fuera, retire y vuelva a
colocar la bombilla (C).
3. Vuelva a colocar el conector en su posición original
en el cuerpo de la lámpara (D) y apriete los tornillos.
Usar (1) máximo 60 vatios tipo “A” Bulbo (no incluido)
o (2) máximo bulbo de CFL de 13 vatios y
(1) máximo 7 vatios tipo “C” Bulbo (Bulbo incluido)
Limpieza de lampara
Desenchufe la lámpara, limpiar con un trapo húmedo.
No utilice los abrasivos.
*Guardar estas instructiones para una referencia futura.
Hecho en China
Revision – 02/13/13