Transcript
Prepare Bottle Pump Collar If your bottle has threads, screw adapter onto bottle. If your bottle does NOT have threads, remove the cap and label from top of bottle. Section B Assemble Pump Spout Pump Bottled Water Pump 1. Spout 2. Collar Section B 4. Section B Model 601151 © 2014 5. Adapter Section A Distributed by: Primo Water Corporation 104 Cambridge Plaza Drive Winston-Salem, NC 27104 3. Adapter Assemble tubes by connecting sections to desired length. Attach assembled tubes to bottom of pump. Attach spout to pump. Insert assembled pump into bottle. Turn collar to secure pump to bottle. Use Place cup, glass or pitcher under spout. 2. Press down on top of pump several times to make water flow. 1. Cleaning and Care 1. Clean pump with a cloth, mild dishwashing soap and water. 2. Clean tubes and spout in dishwasher. 3. Store disassembled in a clean, dry location. Questions A B For expert advice, call us toll free at 866-429-7566 or visit www.KisslaDispensers.com for additional information.