Transcript
K-780 CRUETTETM PULL-DOWN KITCHEN SINK FAUCET Roughing-In Installation Notes Product Information Install this product according to the installation guide. Applicable product: Pull-down kitchen sink faucet Lever handle is ADA compliant. K-780 Optional accessories: Deep roughing-in kit – provides an additional 2″ (5.1 cm) assembly depth Low flow kit – reduces maximum flow to 1.5 gpm (5.7 L) at 60 psi (4.1 bar) High flow kit – increases maximum flow to 2.2 gpm (8.3 L) at 60 psi (4.1 bar) ADA compliant when installed to the specific requirements of the regulation. 1012715 1167289 1167290 4-1/8" (105 mm) 16-3/4" (425 mm) 10-1/2" (267 mm) Ø 1-5/16" 6-13/16" (173 mm) 2-1/2" (64 mm) Max 31-1/4" (794 mm) Supply Hoses with 3/8" Compression Fitting CRUETTETM PULL-DOWN KITCHEN SINK FAUCET 1159577-1-B 10-3/16" (259 mm) 7-7/8" (200 mm) Ø 2" (51 mm) for single-hole installation 2-1/2" (6.4 cm) for 3-hole escutcheon COLD
