Download Arrow VS1014 Instructions / Assembly

● Door Track Assembly (1)
● Rear Wall Angle Assembly (1)
● Side Wall Angle Assembly (2)
● Parts Needed For ●
Step 8
Top Frames
SO21
The top frame pieces give rigidity to
the walls and provide a surface for
attaching the gables which support
the roof.
1 Fasten the rear wall angle across
the inside top of the rear wall using
screws.
2 Fasten the side wall angles across
the inside top of the side panels using screws. Side wall angles must
overlap rear wall angle in corners.
3 Fasten the door track assembly
(holes on top) across the top of the
front wall panels using screws. See
the figure.
Wall Angles
Must Face
Inside
Building
Long Leg
on Top
STEP
STEP
2
10391
1
5986
Opening
facing in
Short Leg
on Bottom
9366
STEP
3
DOOR T
RACK A
SSEMB
LY
FRO
NT
21