Download Arrow YS47 Instructions / Assembly

● Parts Needed For ●
Step 10
Door Stop
● Right Door Assembly (1)
● Left Door Assembly (1)
● 9792 Door Stop (1)
BR23
1 Position doors in corners of door
opening as shown and fasten hinges
with 7/16" (11 mm) flat head bolts and
#6 hex nuts. Be sure the heads on
hinge pins are all installed toward
top.
2
Position door stop to left door,
with tapered end up and hems toward inside of building, and fasten
using four screws. Fasten a spring
latch at the top and bottom of door
stop, using three screws. When
spring latch is engaged with hole in
header or ramp, these will hold left
door closed when not it use. The
hasp and staple can be used to keep
doors closed, or used with a padlock
(not supplied) to lock doors.
STEP
2
Spring Latch
STEP
END VIEW
9792
1
Hem
Fasten Door Stop
Spring Latch
23